1. Home
  2. Products
  3. PCB terminal blocks and PCB connectors
  4. PCB terminal blocks
  5. PCB terminal block - ZFKDS 10-10,00
The figure shows a 1-pos. version of the product
Type: ZFKDS 10-10,00

PCB terminal block - ZFKDS 10-10,00
1986628

PCB terminal block, nominal current: 76 A, rated voltage (III/2): 400 V, nominal cross section: 10 mm2, number of potentials: 1, number of rows: 1, number of positions per row: 1, product range: ZFKDS(A) 10, pitch: 10 mm, connection method: Spring-cage connection, conductor/PCB connection direction: 45 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 6.5 mm, number of solder pins per potential: 4, type of packaging: packed in cardboard. The article can be aligned to create different nos. of positions!

This product needs further products for operation. Mandatory Accessories

Product Details

Type PC terminal block can be aligned
Product line COMBICON Terminals L
Product type Printed circuit board terminal
Number of positions 1
Pitch 10 mm
Number of connections 1
Number of rows 1
Number of potentials 1
Pin layout Linear pinning
Nominal current IN 76 A
Nominal voltage UN 400 V
Pollution degree 3
Rated voltage (III/3) 320 V
Rated surge voltage (III/3) 4 kV
Rated voltage (III/2) 400 V
Rated surge voltage (III/2) 4 kV
Connection technology
Type PC terminal block can be aligned
Nominal cross section 10 mm²
Conductor connection
Connection method Spring-cage connection
Conductor cross section solid 0.2 mm² ... 16 mm²
Conductor cross section flexible 0.2 mm² ... 16 mm²
Conductor cross section AWG 24 ... 6
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 10 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 10 mm²
Stripping length 12 mm
Mounting type Wave soldering Wave soldering
Mounting type Wave soldering
Material data - contact
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics hot-dip tin-plated
Metal surface terminal point (top layer) Tin (10 - 16 µm Sn)
Metal surface soldering area (top layer) Tin (10 - 16 µm Sn)
Material data - housing
Housing color green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Dimensional drawing
Width 15 mm
Height 33.5 mm
Installed height 27 mm
Length of the solder pin 6.5 mm
Length 33.4 mm
Length of the solder pin 6.5 mm
Pin dimensions 1.2 x 1.4 mm
Hole diameter 2.2 mm
Pitch 10 mm
PCB design
Pin spacing 10 mm
Connection test
Specification IEC 60998-2-2:1991-10
Result Test passed
Test for conductor damage and slackening
Specification IEC 60998-2-2:1991-10
Result Test passed
Pull-out test
Specification IEC 60998-2-2:1991-10
Conductor cross section/conductor type/tractive force setpoint/actual value 0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
16 mm² / solid / > 100 N
10 mm² / flexible / > 90 N
Temperature-rise test
Specification IEC 60998-2-1:1990-04
Requirement temperature-rise test Increase in temperature ≤ 45 K
Insulation resistance
Specification IEC 60998-2-2:1991-10
Insulation resistance, neighboring positions 109 Ω
Air clearances and creepage distances |
Specification IEC 60664-1:2007-04
Insulating material group I
Comparative tracking index (IEC 60112) CTI 600
Rated insulation voltage (III/3) 320 V
Rated surge voltage (III/3) 4 kV
minimum clearance value - non-homogenous field (III/3) 3 mm
minimum creepage distance (III/3) 4 mm
Rated insulation voltage (III/2) 400 V
Rated surge voltage (III/2) 4 kV
minimum clearance value - non-homogenous field (III/2) 3 mm
minimum creepage distance (III/2) 3 mm
Rated insulation voltage (II/2) 800 V
Rated surge voltage (II/2) 4 kV
minimum clearance value - non-homogenous field (II/2) 3 mm
minimum creepage distance (II/2) 4 mm
Vibration test
Specification IEC 60068-2-6:1995-03
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Sweep speed 5g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Glow-wire test
Specification IEC 60998-2-2:1991-10
Temperature 850 °C
Time of exposure 5 s
Ambient conditions
Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Relative humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 55 °C
Type of packaging packed in cardboard
Item number 1986628
Packing unit 50 pc
Minimum order quantity 50 pc
Sales Key AABDAA
Product Key AANMBA
Catalog Page Page 479 (C-1-2013)
GTIN 4017918973087
Weight per Piece (including packing) 10.739 g
Weight per Piece (excluding packing) 9.7 g
Customs tariff number 85369010
Country of origin PL

ECLASS

ECLASS-9.0 27440401
ECLASS-10.0.1 27440401
ECLASS-11.0 27460101

ETIM

ETIM 8.0 EC002643

UNSPSC

UNSPSC 21.0

EAC

Approval ID: B.01687

cULus Recognized

Approval ID: E60425-19941110
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
Use group B
300 V 65 A 24 - 6
Use group C
150 V 65 A 24 - 6
Use group D
300 V 10 A 24 - 6

IECEE CB Scheme

Approval ID: DE-51235
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
320 V 76 A 0.2 - 16

VDE Gutachten mit Fertigungsüberwachung

Approval ID: 40036082
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
320 V 76 A 0.2 - 16
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Compatible Products

  1. PCB terminal block ZFKDSA 10-11,7 - 1987054

  1. Screwdriver SZF 3-1,0X5,5 - 1206612

Your advantages

Defined contact force ensures that contact remains stable over the long term
Clamping space opened by means of fixed screwdriver enables convenient conductor connection
Separate bridge shaft for easily connecting multiple positions to jumpers
Quick and convenient testing using integrated test option