1. Home
  2. Products
  3. PCB terminal blocks and PCB connectors
  4. PCB terminal blocks
  5. PCB terminal block - PTSA 0,5/11-2,5-Z
The figure shows a 10-position version of the product
The figure shows the 5-pos. version
Derating diagram for 5 pins;reduction factor=1
The figure shows the 5-pos. version – Zig-zag pinning starts at the right-hand position. Other pinning available on request.

PCB terminal block - PTSA 0,5/11-2,5-Z
1990096

PCB terminal block, nominal current: 2 A, rated voltage (III/2): 250 V, nominal cross section: 0.5 mm2, number of potentials: 11, number of rows: 1, number of positions per row: 11, product range: PTSA 0,5, pitch: 2.5 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 45 °, color: green, Pin layout: Zigzag pinning M, Solder pin [P]: 3.6 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. Offset soldering legs, two-rowed

Product Details

Type PC termination block
Product line COMBICON Terminals XS
Product type Printed circuit board terminal
Number of positions 11
Pitch 2.5 mm
Number of connections 11
Number of rows 1
Number of potentials 11
Pin layout Zigzag pinning M
Nominal current IN 2 A
Nominal voltage UN 250 V
Pollution degree 3
Rated voltage (III/3) 160 V
Rated surge voltage (III/3) 2.5 kV
Rated voltage (III/2) 250 V
Rated surge voltage (III/2) 2.5 kV
Connection technology
Type PC termination block
Nominal cross section 0.5 mm²
Conductor connection
Connection method Push-in spring connection
Conductor cross section solid 0.14 mm² ... 0.5 mm²
Conductor cross section flexible 0.2 mm² ... 0.5 mm²
Conductor cross section AWG 24 ... 20
Stripping length 9 mm
Mounting type Wave soldering Wave soldering
Mounting type Wave soldering
Material data - contact
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics hot-dip tin-plated
Metal surface terminal point (top layer) Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer) Tin (4 - 8 µm Sn)
Material data - housing
Housing color green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Dimensional drawing
Pitch 2.5 mm
Width [w] 29 mm
Height [h] 16.7 mm
Length [l] 12 mm
Installed height 13.1 mm
Solder pin length [P] 3.6 mm
PCB design
Pin spacing 2.5 mm
Connection test
Specification IEC 60998-2-2:1991-10
Result Test passed
Test for conductor damage and slackening
Specification IEC 60998-2-2:1991-10
Result Test passed
Pull-out test
Specification IEC 60998-2-2:1991-10
Conductor cross section/conductor type/tractive force setpoint/actual value 0.14 mm² / solid / > 7 N
0.2 mm² / flexible / > 10 N
0.5 mm² / solid / > 30 N
0.5 mm² / flexible / > 30 N
Temperature-rise test
Specification IEC 60998-2-1:1990-04
Requirement temperature-rise test Increase in temperature ≤ 45 K
Insulation resistance
Specification IEC 60998-2-2:1991-10
Insulation resistance, neighboring positions 109 Ω
Air clearances and creepage distances |
Specification IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09
Insulating material group I
Comparative tracking index (IEC 60112) CTI 600
Rated insulation voltage (III/3) 160 V
Rated surge voltage (III/3) 2.5 kV
minimum clearance value - non-homogenous field (III/3) 1.5 mm
minimum creepage distance (III/3) 2 mm
Rated insulation voltage (III/2) 250 V
Rated surge voltage (III/2) 2.5 kV
minimum clearance value - non-homogenous field (III/2) 1.5 mm
minimum creepage distance (III/2) 1.5 mm
Rated insulation voltage (II/2) 400 V
Rated surge voltage (II/2) 2.5 kV
minimum clearance value - non-homogenous field (II/2) 1.5 mm
minimum creepage distance (II/2) 2 mm
Vibration test
Specification IEC 60068-2-6:1995-03
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Sweep speed 5g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Glow-wire test
Specification IEC 60998-2-2:1991-10
Temperature 850 °C
Time of exposure 5 s
Ambient conditions
Ambient temperature (operation) -40 °C ... 85 °C
Ambient temperature (storage/transport) -40 °C ... 70 °C
Relative humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 55 °C
Type of packaging packed in cardboard
Item number 1990096
Packing unit 50 pc
Minimum order quantity 50 pc
Sales Key AACBAA
Product Key AAKBDA
Catalog Page Page 411 (C-1-2013)
GTIN 4017918973667
Weight per Piece (including packing) 4.444 g
Weight per Piece (excluding packing) 4.192 g
Customs tariff number 85369010
Country of origin PL

ECLASS

ECLASS-9.0 27440401
ECLASS-10.0.1 27440401
ECLASS-11.0 27460101

ETIM

ETIM 8.0 EC002643

UNSPSC

UNSPSC 21.0 39121400

EAC

Approval ID: B.01687

cULus Recognized

Approval ID: E60425-20030527
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
Use group B
Field wiring 300 V 1 A 26 - 20
Factory wiring 300 V 2 A 26 - 20
Use group D
Field wiring 300 V 1 A 26 - 20
Factory wiring 300 V 2 A 26 - 20

CCA

Approval ID: CCA/DE1 34204
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
2 A - 0.5

VDE report with production monitoring

Approval ID: 40013932
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
250 V 2 A - 0.5
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Compatible Products

Your advantages

Time saving push-in connection, tools not required
Defined contact force ensures that contact remains stable over the long term
Angled connection enables multi-row arrangement on the PCB