ELR H5-I-PT- 24DC/500AC-0,6 - Hybrid motor starter

2903908

Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

Product details

Notes on operation	If this device is to be used in combination with the CrossPowerSystem power distribution board, the device mount for the 16 A fuse (order designation: EM-CPS-DA-22,5F/16A; order number: 1002668) is required in order to attach the hybrid motor starter to the power distribution board.

Product type	Hybrid motor starters
Product family	CONTACTRON
Operating mode	100% operating factor

Number of phases	3
Motor starter type	Reversing starter
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation for nominal condition	0.4 W
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	1.5 W
Minimum power dissipation	1.1 W
Coordination type	1
Supply
Rated control circuit supply voltage U_S	24 V DC
Control supply voltage range	19.2 V DC ... 30 V DC
Rated control supply current I_S	40 mA
Protective circuit	Surge protection
	Reverse polarity protection
Insulation characteristics
Rated insulation voltage	500 V
Rated surge voltage	6 kV
Overvoltage category	III
Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC (e.g., 230/400 V AC, 277/480 V AC)
	Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC

Control
Input name	Control input right/left
Rated actuating voltage U_C	24 V DC
Triggering voltage range	19.2 V DC ... 30 V DC
Rated actuating current I_C	5 mA (Input type 1)
Switching threshold	9.6 V (“0” signal)
	19.2 V (“1” signal)
Typical turn-off time	< 30 ms
Protective circuit	Reverse polarity protection

AC output
Rated operating voltage U_e	500 V AC
Operating voltage range	42 V AC ... 550 V AC
Rated operating current I_e	0.6 A (AC-51)
	0.6 A (AC-53a)
Mains frequency	50/60 Hz
Load current range	75 mA ... 600 mA (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
Cooling time	20 min (for auto reset)
Leakage current	0 mA
Protective circuit	Surge protection
Acknowledge output
Note	Confirmation: floating change-over contact, signal contact
Contact switching type	1 changeover contact
Switching capacity in accordance with IEC 60947-5-1	3 A (230 V, AC15)
	2 A (24 V (DC13))

Control circuits
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 14
Load circuit
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 14

Status display	LED (yellow)
Operating voltage display	Green LED
Error indication	Red LED

Width	22.5 mm
Height	107.5 mm
Depth	114 mm

Flammability rating according to UL 94 (Housing)	V0 (Housing)

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m

UKCA
Certificate	UKCA-compliant
UL approval
Certificate	NLDX.E228652
UL data
SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
	5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA	0.6 A (500 V AC)
Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
	30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code	NLDX / NRNT

Standards/regulations
Standards/regulations	IEC 60947-1
	IEC 60947-4-2

Mounting type	DIN rail mounting
Assembly note	alignable, for spacing see derating
Mounting position	vertical (horizontal DIN rail, motor output below)

Commercial data

Item number	2903908
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DK7422
Product key	DK7422
GTIN	4046356771313
Weight per piece (including packing)	242.5 g
Weight per piece (excluding packing)	217.7 g
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Compatible products

Accessories

Your advantages

22.5 mm wide

Reduction in wiring

Space saving

Long service life

3-phase loop bridges

Adjustable current for bimetal function

Low-wear switching

ECLASS-13.0	27370905
ECLASS-15.0	27370905

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	a6b2703e-733e-486c-b54c-e47a8bcce463

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H5-I-PT- 24DC/500AC-0,6 - Hybrid motor starter

2903908

Product details

ECLASS

ETIM

UNSPSC

IECEE CB Scheme

EAC

UL Listed

CCC

cUL Listed

cUL Listed

UL Listed

CCC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H5-I-PT- 24DC/500AC-0,6 - Hybrid motor starter 2903908

Product details

ECLASS

ETIM

UNSPSC

Compatible products

BRIDGE-PT 1 - Bridge 1161777

BRIDGE-PT 2 - Bridge 2904490

BRIDGE-PT 3 - Bridge 2904491

BRIDGE-PT 4 - Bridge 2904492

BRIDGE-PT 5 - Bridge 2904493

BRIDGE-PT 6 - Bridge 2904494

BRIDGE-PT 7 - Bridge 2904495

BRIDGE-PT 8 - Bridge 2904496

BRIDGE-PT 9 - Bridge 2904497

BRIDGE-PT 10 - Bridge 2904498

BRIDGE-PT 1-1M - Bridge 1161778

BRIDGE-PT-2-1M - Bridge 1049407

BRIDGE-PT-3-1M - Bridge 1049408

BRIDGE-PT-4-1M - Bridge 1049409

BRIDGE-PT-5-1M - Bridge 1049413

BRIDGE-PT-2-2M/0,3M - Bridge 1107649

BRIDGE-PT-3-2M/0,3M - Bridge 1107650

BRIDGE-PT-4-2M/0,3M - Bridge 1107644

US-EMLP (15X5) - Plastic label 0828790

UC-EMLP (15X5) - Plastic label 0819301

Your advantages

ELR H5-I-PT- 24DC/500AC-0,6 - Hybrid motor starter

2903908