Cable gland, cable gland material: Nickel-plated brass, external cable diameter 13 mm ... 18 mm, shielding: yes, connecting thread: Pg21, color: silver, with O-ring
| Product type | Full screw connection |
| No. of conductors | 1 |
| Manufacturer | BIMED |
| Manufacturer Designation | BSEM-06 |
| Shielded | yes |
| Cable diameter without cable sheath | 11 mm (Diameter of braided shield) |
| Degree of protection | IP68 |
| Ambient temperature (operation) | -40 °C ... 100 °C (static) |
| Dimensional drawing |
|
| Length | 38 mm |
| Length of the connecting thread | 7.2 mm |
| Hole diameter | 28.4 mm ... 28.6 mm |
| Wrench size, union nut | 30 mm |
| Wrench size, support | 30 mm |
| Hexagon angular dimension | 33 mm |
| Thread type connection side | Pg21 |
| Color | silver |
| Material, insert | Polyamide 6 |
| Cable seal material | CR |
| O-ring material | Perbunan |
| Cable gland material | Nickel-plated brass |
| Cable structure | |
| External cable diameter | 13 mm ... 18 mm |
| Ambient conditions | |
| Halogen-free | no |
| Assembly instructions | 1) Mount screw connection flange in the housing using the correct torque 2) Insert cable 3) Tighten union nut using the correct torque |
| Method 1 Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring. Method 2 Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |