The PROFIBUS master is designed to be aligned to the left of an Axioline F controller. The PROFIBUS master can be used to integrate PROFIBUS devices into the Axioline F station.
AXC F XT PB
-
PLC extension module
1091657
PLCnext Control Extension, PLC extension module, Left alignment, PROFIBUS master; interface: PROFIBUS DP V0 / V1: 1; Amount of process data: 488 Byte; Transmission speed: 12 Mbps; degree of protection: IP20; Scope of supply: including bus base module and Axioline F connector; Supported controller: AXC F 2152, AXC F 3152; The product is being prepared for compliance with the Cyber Resilience Act (CRA).
This product needs further products for operation.
Mandatory accessories
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 45 mm |
| Height | 126 mm |
| Depth | 79.1 mm |
| Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| Note on application | Only for industrial use |
| Note on application | As things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA. |
| Color (Housing) | gray (RAL 7042) |
| Transmission speed | 12 Mbps |
| PROFIBUS DP V0 / V1 | |
| Number of interfaces | 1 |
| Connection method | D-SUB-9 female connector |
| Transmission speed | max. 12 Mbps |
| Communication (PROFIBUS V0 / V1) | cyclical / acyclical |
| Transmission length | max. 100 m |
| Supported controller | AXC F 2152 |
| AXC F 3152 | |
| System limits | |
| Amount of process data (PROFIBUS input/output data max.) | max. 488 Byte (PROFIBUS) |
| Number of parameter data | max. 7 Byte (Standard parameters per PROFIBUS device) |
| Number of configuration data | max. 237 Byte (Application-specific parameters per PROFIBUS device) |
| Number of supported devices (PROFIBUS) | max. 125 |
| Product type | I/O component |
| Product family | PLCnext Control Extension |
| Type | modular |
| Scope of supply | including bus base module and Axioline F connector |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Maximum power dissipation for nominal condition | 2.88 W |
| Potentials: Supply of the logic voltage UL | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 220 mA |
| typ. 70 mA | |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Transient protection; Suppressor diode | |
| Connection technology | |
| Connection name | Axioline F connector |
| Axioline F connector | |
| Connection method | Push-in connection |
| Conductor cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -20 °C ... 60 °C (with 0.5 m/s ventilation speed up to 2,000 m above mean sea level) |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3,000 m above MSL (at an operating temperature of up to 55°C and with 0.5 ms ventilation speed)) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Mechanical test | |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 30g |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 10g |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
| Possible mounting positions | Left alignment |
Your advantages
Individual extension option for a PLCnext Control from the Axiocontrol series
Up to 125 PROFIBUS devices can be connected
PROFIBUS connection via 9-pos. D-SUB socket
Transmission speed of up to 12 Mbps
Electrical isolation between PROFIBUS interface and logic
Diagnostic and status indicators