PLC-ASC-PT100-IN - Analog module

2906918

Pt 100/Pt 1000 temperature transducer for PLC logic logic modules (Generation 2 only), single-channel, signal type (Pt 100, Pt 1000) configurable via DIP switch, screw connection

This product needs further products for operation. Mandatory accessories

Where Can I Buy This Item?

Product details

General	For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Product type	Extension module
Product family	PLC logic
Operating mode	100% operating factor
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics: Air clearances and creepage distances
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Air clearances and creepage distances
Rated insulation voltage	50 V
Rated surge voltage	0.5 kV
Supply
Rated control circuit supply voltage U_S	24 V DC
Rated control supply voltage range with reference to U_S	0.8 ... 1.1
Rated control supply current I_S	14 mA
Protective circuit	Reverse polarity protection
	Surge protection

Analog input resistance
Sensor types (RTD) that can be used	Pt 100 (IEC 60751, α = 0,00385)
Number of inputs	1
Connection technology	2-conductor
Sensor input current	900 µA
Temperature measuring range	-50 °C ... 200 °C
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	1 %
Surge voltage protection	> 33 V
Resolution	10 bit (scaled to 0 to 1000)
Analog input resistance
Sensor types (RTD) that can be used	Pt 1000 (IEC 60751, α = 0.00385)
Number of inputs	1
Connection technology	2-conductor
Sensor input current	900 µA
Temperature measuring range	-50 °C ... 200 °C
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	1 %
Surge voltage protection	> 33 V
Resolution	10 bit (scaled to 0 to 1000)

Digital
Output name	Digital output
Switching voltage range	5 V DC ... 30 V DC
Switching current	≤ 3 mA

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
	0.2 mm² ... 2.5 mm² (Single ferrule)
	2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG	26 ... 14
Tightening torque	0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))

Operating voltage display	Green LED
Error indication	Red LED

Width	6.2 mm
Height	80 mm
Depth	95 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

CE
Certificate	CE-compliant
UL, USA/Canada
Identification	UL 508 Listed

Air clearances and creepage distances
Standards/regulations	DIN EN 50178

Mounting type	DIN rail mounting
Assembly instructions	in rows with zero spacing
Mounting position	any

Commercial data

Item number	2906918
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Product key	CK2622
Catalog page	Page 431 (C-5-2017)
GTIN	4055626153797
Weight per piece (including packing)	79.4 g
Weight per piece (excluding packing)	53.3 g
Customs tariff number	85389099
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Compatible products

Mandatory accessories

ECLASS-11.0	27242201
ECLASS-13.0	27242201
ECLASS-12.0	27242201


REACh SVHC	Lead 7439-92-1

China RoHS	Environmentally Friendly Use Period = 50 years
		For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PLC-ASC-PT100-IN - Analog module

2906918

Product details

ECLASS

ETIM

UNSPSC

EAC

UL Listed

cUL Listed

cULus Listed

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PLC-ASC-PT100-IN - Analog module 2906918

Product details

ECLASS

ETIM

UNSPSC

Compatible products

PLC-V8C/PT-24DC/BM2 - Controller 2907446

PLC-V8C/SC-24DC/BM2 - Controller 2907447

PLC-V8C/PT-24DC/SAM2 - Controller 2907443

PLC-V8C/SC-24DC/SAM2 - Controller 2907445

PLC-V8C/PT-24DC/RS485 - Controller 1452919

PLC-ASC-PT100-IN - Analog module

2906918