UM- 8 RM-S-G24/21/PLC-MSTB - Active module - 2311030

Notes

Notes on operation	For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Product properties

Product type	Relay Module
Insulation characteristics: Air clearances and creepage distances, input/output
Insulation	Reinforced insulation
Overvoltage category	III
Pollution degree	2
Insulation characteristics: Air and creepage distances, output/output
Insulation	Functional insulation
Overvoltage category	II
Pollution degree	2

Electrical properties

Air clearances and creepage distances, input/output
Rated insulation voltage	260 V
Rated surge voltage	6 kV (1.2/50 μs)
Air and creepage distances, output/output
Rated insulation voltage	260 V
Rated surge voltage	2.3 kV (1.2/50 μs)

Input data

Nominal input voltage U_N	24 V DC (±10 %)
Typical input current at U_N	200 mA (200 mA supply / ≤ 20 mA input current per signal)

Output data

Switching
Contact switching type	Single contact, 1 changeover contact
Maximum switching voltage	150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.)
Limiting continuous current	4 A

Connection data

Controller level
Connection in acc. with standard	IEC 60603-13
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	14
Field level
Connection method	Screw connection
Number of connections	1
Number of positions	12
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Supply
Connection method	Screw connection
Number of connections	1
Number of positions	2
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
DEROG
Connection method	Screw connection
Number of connections	1
Number of positions	3
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12

Dimensions

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 50 °C
Altitude	≤ 2000 m

Standards and regulations

Air clearances and creepage distances, input/output
Standards/regulations	DIN EN 50178: 1998-04
Air and creepage distances, output/output
Standards/regulations	DIN EN 50178: 1998-04

Mounting

Mounting type	DIN rail mounting
Mounting position	any

Item number	2311030
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	DK2A91
GTIN	4046356134958
Weight per piece (including packing)	505.1 g
Weight per piece (excluding packing)	505 g
Customs tariff number	85389099
Country of origin	DE

ECLASS-13.0	27141152
ECLASS-15.0	27141152

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	90b00a4a-de71-45f3-9f97-0b9b56758dd0

UM- 8 RM-S-G24/21/PLC-MSTB - Active module

2311030