Signal conditioner - MINI MCR-2-I-I-PT
2901999

3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, push-in connection technology.

Free Download available. Downloads

Product Details


Standard signal 3-way signal conditioner with plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard current signals. The measuring transducer supports fault monitoring and NFC communication.



Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Product type Signal conditioner
No. of channels 1
Type Signal conditioner
Insulation characteristics
Overvoltage category II
Pollution degree 2

No. of channels 1
Electrical isolation 3-way isolation
Electrical isolation between input and output yes
Limit frequency (3 dB)  30 Hz
Protective circuit Transient protection
Signal transmission behavior In = Out
Step response (10-90%)  10 ms
Maximum temperature coefficient 0.01 %/K
Temperature coefficient, typical 0.01 %/K
Maximum transmission error 0.1 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage 300 Vrms
Test voltage 3 kV AC (50 Hz, 60 s)
Insulation Reinforced insulation according to IEC/EN 61010-1
Supply
Nominal supply voltage 24 V DC
Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption 25 mA (24 V DC)
54 mA (12 V DC)
Power consumption ≤ 800 mW (at 9.6 V DC)

Signal: Current
Number of inputs 1
Configurable/programmable no
Current input signal 0 mA ... 20 mA
4 mA ... 20 mA
Input resistance current input approx. 63 Ω (+0.7 V for test diode)

Signal: Current
Number of outputs 1
Configurable/programmable no
Non-load voltage < 17 V
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
Max. current output signal 22 mA
Load/output load current output ≤ 600 Ω (at 20 mA)
Ripple < 20 mVPP (at 600 Ω)

Connection method Push-in connection
Stripping length 10 mm
Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12 (flexible)

Status display Green LED (supply voltage)

Width 6.2 mm
Height 109.81 mm
Depth 119.2 mm

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
Housing material PBT

Ambient conditions
Degree of protection IP20 (not assessed by UL)
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)

CE
Certificate CE-compliant
ATEX
Identification  II 3 G Ex ec IIC T4 Gc
Certificate BVS 19 ATEX E 047 X
UKCA Ex (UKEX)
Identification  II 3 G Ex ec IIC T4 Gc
Certificate PxCIF21UKEX2902000X
IECEx
Identification Ex ec IIC T4 Gc
Certificate IECEx BVS 19.0041X
CCC / China-Ex
Identification Ex nA IIC T4 Gc
UL, USA / Canada
Identification UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
Shipbuilding approval
Certificate DNV GL TAA00002UA
EAC Ex
Identification  2Ex ec IIC T4 Gc
Certificate BY/112 02.01 TP012 103.01 00079
DNV GL data
Temperature B
Humidity B
Vibration A
EMC A
Enclosure Required protection according to the Rules shall be provided upon installation on board

Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2
Note When being exposed to interference, there may be minimal deviations.
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Comments Safety measures must be taken to prevent electrostatic discharge.
Electromagnetic HF field
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Fast transients (burst)
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Surge current load (surge)
Standards/regulations EN 61000-4-5
Conducted interference
Designation Conducted interferences
Standards/regulations EN 61000-4-6

Electrical isolation 3-way isolation
GB Standard
Standards/regulations GB 3836.1
GB 3836.8

Mounting type DIN rail mounting
Assembly instructions The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail.
Mounting position any

Item number 2901999
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key CK1411
Product Key CK1411
Catalog Page Page 76 (C-5-2019)
GTIN 4046356649506
Weight per Piece (including packing) 107.5 g
Weight per Piece (excluding packing) 91.03 g
Customs tariff number 85437090
Country of origin DE


ECLASS

ECLASS-9.0 27210120
ECLASS-10.0.1 27210120
ECLASS-11.0 27210120

ETIM

ETIM 8.0 EC002653

UNSPSC

UNSPSC 21.0 39121000

DNV GL

Approval ID: TAA00002UA

UL Listed

Approval ID: FILE E 238705
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

CCC

Approval ID: 2021322310003859

cUL Listed

Approval ID: FILE E 238705
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

EAC Ex

Approval ID: RU C-DE.AB72.B.02066

IECEx

Approval ID: IECEx BVS 19.0041X

cUL Listed

Approval ID: FILE E 196811
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

UL Listed

Approval ID: FILE E 196811
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

ATEX

Approval ID: BVS 19 ATEX E 047 X

ATEX

Approval ID: 2902037_Ex-n

cULus Listed

cULus Listed


REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products