TRIO-UPS-2G/1AC/1AC/120V/750VA - Uninterruptible power supply - 2905908

Notes

General
Note on the battery	This product contains a battery with a limited shelf life that must be charged every few months. The product packaging indicates when the battery must be started up or recharged. The general shelf life can be found in the energy storage devices area under “Latest startup”.

Input data

AC operation
Input voltage	120 V AC
Input voltage range	96 V AC ... 138 V AC
Voltage type of supply voltage	AC
Frequency range (f_N)	45 Hz ... 55 Hz
Frequency range (f_N)		55 Hz ... 65 Hz
Current consumption	6 A (max.)
Power factor (cos phi)	0.8
Input fuse	10 A 400 V gRL
Permissible backup fuse	B10 B16 Listed breaker
Digital Control (configurable)
Designation	Remote
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 35 kΩ between Remote and SGnd)
Digital Control Low-Active (configurable)
Battery-operated start 120 V AC low signal	Connection to SGnd with < 2.7 kΩ
Battery-operated start 120 V AC high signal	Open (> 200 kΩ between Bat.-Start and SGnd)

Output data

Classification according to IEC 62040-3	VFD-SS-311
Efficiency	> 95 % (100% load, with charged battery)
Efficiency		~ 81 % (100 % load )
Nominal output voltage	120 V AC
Form of output voltage	Pure sine
Nominal output current (I_N)	6 A
Bridging time	60 s
UPS connection in parallel	no
UPS connection in series	no
Apparent power	750 VA
Nominal power	600 W (Real power)
Crest factor	2.8
Switch-over time	< 10 ms
Connection in parallel	no
Connection in series	no
Mains operation
Nominal output voltage	120 V AC
Nominal output current (I_N)	6 A (750 VA)
Battery operation
Nominal output voltage	120 V AC
Nominal output current (I_N)	6 A (750 VA)
Frequency (after automatic detection in mains operation)	50 Hz
Frequency (after automatic detection in mains operation)		60 Hz
Signal: Alarm
Output voltage	24 V (SELV)
Continuous load current	≤ 20 mA
Signal: Battery mode
Output voltage	24 V (SELV)
Continuous load current	≤ 20 mA
Signal: Ready
Output voltage	24 V (SELV)
Continuous load current	≤ 20 mA
Signal:
Signal ground SGnd	Reference potential for Bat.-Mode, Ready, Remote, and Bat.-Start

Energy storage

Nominal voltage U_N	24 V DC
Charging current	0.7 A ... 1.1 A
Nominal capacity	4 Ah
Nominal capacity range	4 Ah
Charging time	7 h
Buffer period	20 min (100 W)
		4 min (300 W)
		1 min (600 W)
Latest startup date (battery only)	6 Months (0 °C ... 20 °C)
Latest startup (battery only) - range	6 Months ... 3 Months (20 °C ... 30 °C)
Latest startup (battery only) - range		3 Months ... 1 Months (30 °C ... 40 °C)
Battery technology	Lead rechargeable battery module
Memory medium	Lead rechargeable battery module
Accumulator type	2x Panasonic UP-VW1220P1 / BB Battery HR4.2-12FR
Can be extended with external battery	1x 24 V 4 Ah
Battery fuse	40 A, 32 V

Connection data

Input
Connection method	Push-in connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	4 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Stripping length	10 mm
Output
Connection method	Push-in connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	4 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Stripping length	10 mm
Signal
Connection method	Push-in connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	1.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	16
Stripping length	8 mm
Signal
Connection method	Push-in connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	1.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	16
Stripping length	8 mm

Interfaces

Interface	MINI-USB type B
Maximum cable length	3 m

Signaling

Types of signaling	LED
Signal output: Transistor output, active
Signalization designation	Alarm
Status display	LED
Color	red
Signal output: Transistor output, active
Signalization designation	Battery mode
Status display	LED
Color	yellow
Signal output: Transistor output, active
Signalization designation	Ready
Signal output
Status display	LED
Color	green
Signal output
Signalization designation	Battery charge
Status display	LED
Color	yellow
Signal output
Signalization designation	Service
Status display	LED
Color	red

Electrical properties

Number of phases	1.00

Product properties

Product type	AC UPS
Product family	TRIO AC UPS – UPS with integrated battery
MTBF (IEC 61709, SN 29500)	> 206000 h (40 °C)
Insulation characteristics
Protection class	I
Overvoltage category	II
Degree of pollution	3
Life expectancy (electrolytic capacitors)
Time	32861 h

Dimensions

Width	210 mm
Height	170 mm
Depth	136 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting

Mounting type	DIN rail mounting

Material specifications

Type of housing	DX51D+AZ (steel sheet / Galvalume)
Hood version	PC + ABS

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	0 °C ... 40 °C
Ambient temperature (storage/transport)	-15 °C ... 40 °C (with charged energy storage device)
Maximum altitude	≤ 3000 m (> 2000 m, observe derating)
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (25 °C, non-condensing)
Shock	20g in all directions (EN 60068-2-27)
	30g in each space direction with UWA 130
Vibration (operation)	5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)

Standards and regulations

Standards
Standard uninterruptible power supply systems	EN 62040-1

Approvals

UL approvals	UL/C-UL Recognized UL 1778

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Noise emission in accordance with EN 62040-2
Noise immunity	Immunity in accordance with EN 62040-2
Noise immunity		Immunity in accordance with EN 61000-6-1 (residential), EN 61000-6-2 (industrial), and EN 61000-6-5 (power station equipment zone), IEC/EN 61850-3 (power supply)
Conducted noise emission	EN 62040-02 (Class C2)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 3 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 3 - asymmetrical)
Signal		2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A (B for USB)
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Surge voltage load (surge)
Input	1 kV (Test Level 2 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 2 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	60 Hz
Test field strength	100 A/m
Comments	Criterion A
Emitted interference
Emitted radio interference in acc. with EN 55011	EN 55011 (EN 55022) Class B, area of application: Industry and residential
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Item number	2905908
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CM19
Product key	CMUO15
Catalog page	Page 332 (C-4-2019)
GTIN	4055626007397
Weight per piece (including packing)	6,359 g
Weight per piece (excluding packing)	6,098 g
Customs tariff number	85371091
Country of origin	DE

ECLASS-11.0	27040705
ECLASS-13.0	27040705
ECLASS-12.0	27040705

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-3 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	387c5bfb-b3a6-451f-9b8a-416d41c19289

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TRIO-UPS-2G/1AC/1AC/120V/750VA - Uninterruptible power supply

2905908

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

EAC

EAC

DNV

KC

cUL Recognized

UL Recognized

cULus Recognized

cULus Recognized

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TRIO-UPS-2G/1AC/1AC/120V/750VA - Uninterruptible power supply 2905908

Product details

ECLASS

ETIM

UNSPSC

Compatible products

QUINT-BAT/24DC/ 3.4AH - Battery module 2866349

UPS-BAT/PB/24DC/4AH - Battery module 1274117

UPS-BAT-KIT/PB/2X12V/4AH - Uninterruptible power supply replacement battery 1283116

MINI-SCREW-USB-DATACABLE - Data cable 2908217

PLT-SEC-T3-120-FM-UT - Type 3 surge protection device 2907918

UWA 130 - Mounting adapter 2901664

FUSE 10A/400V GRL - Fuse 2908358

FUSE 40A/32V ATOF - Fuse 2908357

Your advantages

TRIO-UPS-2G/1AC/1AC/120V/750VA - Uninterruptible power supply

2905908