System cables with D-SUB and FLK connectors

System cables with D-SUB and FLK connectors

System cables with D-SUB or FLK connectors are the quick, error-free 1:1 connection between automation devices and termination boards. Select from a wide range of pre-assembled system cables with different numbers of positions. They can be connected with single wires and pin or socket strips. Our service for you: Alongside standard lengths between 0.5 m and 10 m, we can supply you with system cables in the length you specify.

More information

Your advantages

  • Fast, reverse polarity-protected 1:1 wiring with pre-assembled system cables
  • Outstanding service: available in standard lengths from 0.5 to 10 m as well as custom lengths
  • Flexible connection: via free cable end with single-core wire marking, pin or female strips
  • High current carrying capacity, thanks to the large conductor cross-section of each single-core wire
  • Resilient, thanks to encapsulated connectors with a robust design

New products

Halogen-free cables for Siemens SIMATIC® ET 200SP HA
Halogen-free cables for Siemens SIMATIC® ET 200SP HA
For increased fire protection requirements and a fast, fault-free connection between the I/O card and field wiring

With the new halogen-free (HF) splitting cables, increased requirements can be met, especially with regard to fire protection. The HF cables complement the existing Plug and Play solution (front adapter, HF cables, and relays) for the Siemens SIMATIC® ET200SP HA process controller. This ensure a fast, fault-free connection between the I/O card and field wiring.

These are the main features

  • Suitable for higher fire protection requirements due to no halogens
  • Fast, clear, and fault-free wiring thanks to a plug-in system solution
  • Clear signal assignment due to byte-wise marked plugs
  • Simple Plug and Play connection between I/O cards and field level thanks to the modular solution (front adapter, HF cable, and relay)

These are the advantages

  • Cable: halogen-free
  • Connector: 1x D-SUB 37 to 4x (2x) D-SUB 15
  • Available lengths: 1, 2, 3, ... 10 m
  • Conductor cross-section: 0.14 mm²
  • Amperage per single-core wire: 1 A
  • Operating temperature up to +70°C