Universal interface module with 1:1 connection between the 40-pos. system connection and the spring-cage connection.
Product details
Product type
Interface module
No. of channels
4
8
12
16
Operating mode
100% operating factor
Insulation characteristics: Air clearances and creepage distances
Insulation
Functional insulation
Overvoltage category
II
Pollution degree
2
Operating voltage (DC)
≤ 30 V DC
Current (per branch)
≤ 0.1 A
Air clearances and creepage distances
Rated insulation voltage
50 V
Rated surge voltage
0.5 kV (1.2/50 μs)
Supported controller YOKOGAWA CS3000 CentumVP
Suitable I/O card
AAI543
AAI141
AAI143
AAI835
AAI841
AAI135
AAR181
AAT141
AAV141
AAV142
AAB841
AAV542
Supported controller YOKOGAWA STARDOM
Suitable I/O card
NFAI141
NFAI143
NFAI543
NFAI135
NFAP135
NFAV141
NFAV142
NFAV542
NFAB841
NFAI841
NFAI835
Connection 1 (control level)
Connection method
Yokogawa, KS compatible
Number of connections
1
Number of positions
40
Note
Usable system cables: Phoenix Contact YUC40, Yokogawa KS1
Tightening torque
0.5 Nm
Pitch
2.54 mm
Connection 2 (field level)
Connection method
Spring-cage connection
Stripping length
7.5 mm
Number of positions
36
Conductor cross section rigid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
0.25 mm² ... 1.5 mm² (Ferrule without plastic sleeve)
0.25 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG
24 ... 14
Pitch
5.08 mm
Status display present
no
Item dimensions
Width
99.5 mm
Height
125.4 mm
Depth
59.7 mm
Ambient conditions
Degree of protection (Module)
IP00
Degree of protection (Installation location)
≤ IP54
Ambient temperature (operation)
-20 °C ... 50 °C
Ambient temperature (storage/transport)
-20 °C ... 70 °C
Altitude
≤ 2000 m
UKCA
Certificate
UKCA-compliant
Air clearances and creepage distances
Standards/regulations
EN IEC 60664-1
Mounting type
DIN rail mounting
Mounting position
any
Notes on operation
For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
