MACX MCR-EX-T-UIREL-UP-SP-C - Temperature measuring transducer - 2924809

Notes

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product properties

Product type	Temperature transmitter
Product family	MACX Analog
Configuration	DIP switches
	Software
Insulation characteristics
Overvoltage category	II
Pollution degree	2

System properties

Functionality
Configuration	DIP switches
	Software

Electrical properties

Electrical isolation	4-way isolation
Electrical isolation between input and output	yes
Step response (0–99%)	≤ 1.75 s (SIL on)
Step response (0–99%)		1.3 s (SIL off)
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
Electrical isolation Input/output/power supply
Test voltage	2.5 kV AC (50 Hz, 60 s)
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_P
Electrical isolation Input/power supply IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_P
Electrical isolation Input/switching output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_P
Electrical isolation Output/supply IEC/EN 61010-1
Standards/regulations	IEC/EN 61010-1
Rated insulation voltage	300 V_rms
Insulation	Safe isolation
Supply
Nominal supply voltage range	24 V AC/DC ... 230 V AC/DC -20 % ... +10 % (50/60 Hz)
Supply voltage range	19.2 V AC/DC ... 253 V AC/DC (50/60 Hz)
Typical current consumption	< 100 mA (24 V DC)
Power consumption	< 2.4 W

Input data

Signal
Number of inputs	1
Input signal	Temperature
	Resistor
	Voltage
Measurement
Sensor types (RTD) that can be used	Pt, Ni, Cu sensors: 2, 3, 4-wire
Sensor types that can be used (TC)	B, E, J, K, N, R, S, T, L, U, CA, DA, A1G, A2G, A3G, MG, LG
Temperature measuring range	-250 °C ... 2500 °C (Range depending on the sensor type)
Linear resistance measuring range	0 Ω ... 50 kΩ
Potentiometer resistance range	0 Ω ... 50 kΩ
Linear mV signal range	-1000 mV ... 1000 mV

Output data

Switching: Relay
Configurable/programmable	Yes
Contact switching type	3 changeover contacts
Contact material	AgSnO₂, hard gold-plated
Maximum switching voltage	250 V AC/DC
Max. switching current	2 A (250 V AC)
		0.1 A (250 V DC)
		2 A (28 V DC)
Signal: Voltage/current
Number of outputs	1
Configurable/programmable	Yes
Max. voltage output signal	± 11 V
Current output signal	0 mA ... 20 mA (SIL off)
Current output signal		4 mA ... 20 mA (SIL on)
Max. current output signal	22 mA
Load/output load voltage output	≥ 10 kΩ
Load/output load current output	≤ 600 Ω (20 mA)
Behavior in the event of a sensor error	freely programmable

Connection data

Connection method	Push-in connection
Stripping length	10 mm
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible (2 conductors with same cross section)	0.25 mm² ... 0.34 mm² (TWIN ferrule without plastic sleeve)
	0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross-section AWG	24 ... 14
	24 ... 22 (TWIN ferrule without plastic sleeve)
	20 ... 16 (TWIN ferrule with plastic sleeve)

Ex data

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2
Ex i circuits (EPL)	Ga
		Da
		Ma
		Div. 1
Safety data
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	44 nF
Max. output voltage U_o	6 V DC
Max. output current I_o	7 mA (RTD in 2-conductor technology)
		13 mA (RTD in 3-conductor technology)
		16 mA (RTD in 4-conductor technology)
		13 mA (TC with internal cold junction compensation)
		10 mA (TC with external cold junction compensation)
		5 mA (mV)
		13 mA (Potentiometer)
Max. output power P_o	11 mW (RTD in 2-conductor technology)
		20 mW (RTD in 3-conductor technology)
		24 mW (RTD in 4-conductor technology)
		20 mW (TC with internal cold junction compensation)
		15 mW (TC with external cold junction compensation)
		7.5 mW (mV)
		20 mW (Potentiometer)
IIA/I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 150 µF
IIB/IIIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 100 µF
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 10 µF
IIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 600 nF, 10 mH / 600 nF, 1 mH / 600 nF
I/IIB/IIA/IIIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 1 µF, 10 mH / 1 µF, 1 mH / 1 µF

Signaling

Status display	LED supply voltage, PWR (green)
	Red LED, flashing (line, sensor error, ERR)
	Red LED (module error, ERR)
	Yellow LED (switching output)

Dimensions

Width	35 mm
Height	107.9 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Material specifications

Color	gray (RAL 7042)
Flammability rating according to UL 94 (Housing)	V0 (Housing)
Housing material	PA 6.6-FR

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-20 °C ... 65 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	typ. 5 % ... 95 % (non-condensing)
Shock (operation)	15g (IEC 60068-2-27)
Vibration (operation)	5g (IEC 60068-2-6)
Altitude range (≤ 2000 m)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-20 °C ... 65 °C
Safety-related maximum voltage U_m	253 V AC/DC (Terminals 1.1, 1.2)
		250 V AC (Terminals 3.1, 3.2, 3.3)
		120 V DC (Terminals 3.1, 3.2, 3.3)
		30 V (Installation in zone 2)
Altitude range (≤ 3000 m)
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	-20 °C ... 55 °C
Safety-related maximum voltage U_m	190 V AC (Terminals 1.1, 1.2)
		110 V DC (Terminals 1.1, 1.2)
		190 V AC (Terminals 3.1, 3.2, 3.3)
		110 V DC (Terminals 3.1, 3.2, 3.3)
		30 V (Installation in zone 2)
Altitude range (≤ 4000 m)
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	-20 °C ... 50 °C
Safety-related maximum voltage U_m	60 V AC/DC (Terminals 1.1, 1.2)
		60 V AC/DC (Terminals 3.1, 3.2, 3.3)
		30 V (Installation in zone 2)
Altitude range (≤ 5000 m)
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	-20 °C ... 45 °C
Safety-related maximum voltage U_m	60 V AC/DC (Terminals 1.1, 1.2)
		60 V AC/DC (Terminals 3.1, 3.2, 3.3)
		30 V (Installation in zone 2)

Approvals

CE
Certificate	CE-compliant
ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3 G Ex ec ic nC [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
Certificate	IBExU 10 ATEX 1044 X
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex ec ic nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Certificate	IECEx IBE 10.0004 X
INMETRO
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex ec ic nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Certificate	DNV 18.0143 X
UL, USA/Canada
Identification	UL 508 Listed
Certificate	, C.D.-No 83104549
Shipbuilding approval
Certificate	DNV GL TAA000020C
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Certificate	SEBS-A.150520/17, V2.0
Systematic Capability
Identification	2
Performance Level (ISO 13849)
Identification	d
Shipbuilding data
Temperature	B
Humidity	B
Vibration	A
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

EMC data

Electromagnetic compatibility	Conformance with EMC directive
Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Noise emission
Standards/regulations	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	2 %
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	2 %
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	2 %

Standards and regulations

Electrical isolation	4-way isolation

Mounting

Item number	2924809
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Sales key	DK1
Product key	DK1215
Weight per piece (including packing)	347 g
Weight per piece (excluding packing)	282.7 g
Customs tariff number	85437090
Country of origin	DE

ECLASS-13.0	27210129
ECLASS-15.0	27210129
ECLASS-15.0 ASSET	27250101

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MACX MCR-EX-T-UIREL-UP-SP-C - Temperature measuring transducer

2924809

Product details

ECLASS

ETIM

UNSPSC

DNV

UL Listed

cUL Listed

IECEx

cUL Listed

UL Listed

ATEX

INMETRO

INMETRO

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MACX MCR-EX-T-UIREL-UP-SP-C - Temperature measuring transducer 2924809

Product details

ECLASS

ETIM

UNSPSC

Compatible products

MCR-DP - Separating plate 1430594

IFS-USB-PROG-ADAPTER - Programming adapter 2811271

MACX MCR-EX-I20 - Plug 2905679

MACX MCR-EX-CJC - Plug 2925002

IFS-BT-PROG-ADAPTER - Adapter 2905872

MPS-IH WH - Insulating sleeve 0201663

MPS-IH RD - Insulating sleeve 0201676

MPS-IH BU - Insulating sleeve 0201689

MPS-IH YE - Insulating sleeve 0201692

MPS-IH GN - Insulating sleeve 0201702

MPS-IH GY - Insulating sleeve 0201728

MPS-IH BK - Insulating sleeve 0201731

MPS-MT - Test plug 0201744

UC-EMLP (11X9) - Plastic label 0819291

UC-EMLP (11X9) YE - Plastic label 0822602

UC-EMLP (11X9) CUS - Plastic label 0824547

UC-EMLP (11X9) YE CUS - Plastic label 0824548

UC-EMLP (11X9) SR - Plastic label 0828094

UC-EMLP (11X9) SR CUS - Plastic label 0828098

US-EMLP (11X9) - Plastic label 0828789

US-EMLP (11X9) YE - Plastic label 0828871

US-EMLP (11X9) SR - Plastic label 0828872

LS-EMLP (11X9) WH - Device marker 0831678

LS-EMLP (11X9) SR - Device marker 0831705

LS-EMLP (11X9) YE - Device marker 0831732

QUINT4-SYS-PS/1AC/24DC/2.5/SC - Power supply 2904614

SZS 0,6X3,5 - Screwdriver 1205053

Your advantages

MACX MCR-EX-T-UIREL-UP-SP-C - Temperature measuring transducer

2924809