MCR-S-1-5-UI-SW-DCI-NC - Current measuring transducer - 2814731

Notes

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product properties

Product type	Current measuring transducer
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Electrical properties

Total error	≤ 1.5 % (Temperature range)
Maximum power dissipation for nominal condition	2.2 W
Measuring category	III
Test voltage output/power supply	500 V AC (50 Hz, 60 s)
Test voltage input/output	4 kV AC (50 Hz, 60 s)
Test voltage input/power supply	4 kV AC (50 Hz, 60 s)
Protective circuit	Surge protection; 33 V suppressor diode
Step response (10-90%)	330 ms (AC)
Step response (10-90%)		40 ms (DC)
Temperature coefficient, typical	< 0.025 %/K
Maximum transmission error	< 0.5 % (of nominal range value under nominal conditions)
Rated insulation voltage	300 V AC (to earth)
Supply
Supply voltage range	20 V DC ... 30 V DC
Max. current consumption	< 50 mA (without load)

Input data

Measurement
Number of inputs	3
Configurable/programmable	Yes, unconfigured
Input current range	0 A AC/DC ... 11 A AC/DC (Permitted continuous overload: 120%)
Measuring range	0 A AC/DC ... 1 A AC/DC
		0 A AC/DC ... 5 A AC/DC
		0 A AC/DC ... 10 A AC/DC
Setting range for min. input current	0 mA AC/DC ... 200 mA AC/DC
Setting range for max. input current	0 A AC/DC ... 11 A AC/DC
LSB: Current	1 µA (1 A)
		2 µA (2 A)
		5 µA (5 A)
		10 µA (10 A)
		50 µA (50 A)
		100 µA (100 A)
Overload capacity	2 x I_{N (}continuous)
Surge strength	20 x I_N (1 s)
Frequency measuring range	15 Hz ... 400 Hz
Curve type	AC, DC or distorted currents
Operate threshold	2 % (of measuring range nominal value 1/5/10 A)

Output data

Switching: Relay
Contact switching type	1 changeover contact
Contact material	AgSnO, hard gold-plated
Maximum switching voltage	30 V AC
		36 V DC
		250 V AC
Limiting continuous current	50 mA (for gold layer, 30 V AC/ 36 V DC)
Limiting continuous current		2 A (in case of a destroyed gold layer, 250 V AC)
Switching: Transistor
Continuous load current	80 mA (Not short-circuit proof)
Output voltage range	19 V ... 29 V (supply voltage - 1 V)
Setting range of the threshold value	1 % ... 110 %
Setting range of the response delay	0.1 s ... 20 s
Status display	LED (yellow)
Signal: Voltage/current
Configurable/programmable	Yes, unconfigured
Voltage output signal	0 V ... 5 V
		1 V ... 5 V
		0 V ... 10 V
		2 V ... 10 V
		-5 V ... 5 V
		-10 V ... 10 V
		10 V ... 0 V
		10 V ... 2 V
		10 V ... -10 V
		5 V ... 0 V
		5 V ... 1 V
		5 V ... -5 V
Current output signal	0 mA ... 20 mA
		4 mA ... 20 mA
		20 mA ... 0 mA
		20 mA ... 4 mA
Load/output load voltage output	> 10 kΩ
Load/output load current output	< 500 Ω

Connection data

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Signaling

Status display	LED (green)

Dimensions

Item dimensions
Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Material specifications

Color	green (RAL 6021)
Housing material	Polyamide PA non-reinforced

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	< 2000 m
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

Approvals

CE
Certificate	CE-compliant
UL, USA/Canada
Identification	Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X
	Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only

EMC data

Electromagnetic compatibility	Conformance with EMC directive
Low Voltage Directive	Conformance with Low Voltage Directive
Noise immunity	EN 61000-6-2
Noise emission
Standards/regulations	EN 61000-6-4

Standards and regulations

Standards/regulations	IEC 61010-2-030

Mounting

Mounting type	DIN rail mounting
Mounting position	any

Item number	2814731
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CK4
Product key	CMMA33
Catalog page	Page 230 (C-5-2019)
GTIN	4017918169282
Weight per piece (including packing)	203.9 g
Weight per piece (excluding packing)	149.08 g
Customs tariff number	85437090
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Hexahydromethylphthalic anhydride (CAS: n/a)
REACH candidate substance (CAS No.)		Lead (CAS: 7439-92-1)
SCIP	559130c9-efe2-4ff8-9e29-a228cb04a43f

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MCR-S-1-5-UI-SW-DCI-NC - Current measuring transducer

2814731

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

EAC

cUL Listed

UL Listed

Compatible products

Your advantages