SACC-CI-M12MSR-5CON-L90 THR T - Contact carrier

1706603

Contact carrier, 5-position, Pin, angled, M12, coding: A, THR solder connection, THR solder connection

Notes on operation	The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:	Not compatible with SPEEDCON housings.

Product type	Contact insert
Application	Signal
Number of positions	5
Shielded	no
Coding	A
Thread type	M12
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Rated surge voltage	1.5 kV
Contact resistance	≤ 10 mΩ
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	60 V
Nominal current I_N	4 A

Connection method	THR solder connection

Flammability rating according to UL 94	V0
Contact material	CuZn
Contact surface material	Au
Contact carrier material	PA 6.6

Connection 1
Head design	Pin
Head cable outlet	angled
Head thread type	M12
Coding	A

Mechanical data
Insertion/withdrawal cycles	> 100

Ambient conditions
Degree of protection	IP67
	IP67, in plugged and locked state
Ambient temperature (operation) (male connector/female connector)	-40 °C ... 105 °C (without mechanical actuation)
UL Type Rating	Type 4 (indoor use only)

M12
Standard designation	M12 connector
Standards/specifications	IEC 61076-2-101

Mounting type	THR solder connection The pin assignment is rotated 180° to comply with the standard.
Assembly note	The pin assignment is rotated 180° to comply with the standard.

Type of packaging	Tray

Item number	1706603
Packing unit	120 pc
Minimum order quantity	120 pc
Sales key	C1
Product key	ABQAHM
GTIN	4067923263987
Weight per piece (including packing)	5.956 g
Weight per piece (excluding packing)	5.956 g

Compatible products

Accessories

Your advantages

Suitable for pick-and-place: Automated assembly on the PCB helps to increase efficiency in production

Optimized design: Shifted center of gravity, thereby “effortless” standing on the PCB without locking clips

Flexible: Easy positioning and alignment on the PCB even in confined spaces

Modular: Compatible with the available THR housings

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SACC-CI-M12MSR-5CON-L90 THR T - Contact carrier

1706603

Product details

ETIM

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SACC-CI-M12MSR-5CON-L90 THR T - Contact carrier 1706603

Product details

ETIM

Compatible products

PROT-M12 FS - Sealing cap 1560251

PROT-M12 FS-M - Sealing cap 1430488

SACC-M12-SCO PLUG - Housing screw connection 1551493

SACC-DSIV-M12-PLUG - Housing screw connection 1416145

SACC-M12-SCO PLUG L90 - Housing screw connection 1436709

SACC-BP-M-M12/M15-6-THR - Housing screw connection 1413997

SACC-BP-M-M12/M15-7-THR - Housing screw connection 1413996

SACC-BP-M-M12/M15-6-THR SCO - Housing screw connection 1413999

SACC-BP-M-M12/M15-7-THR SCO - Housing screw connection 1413998

SACC-M12 PLUG PRESS - Housing screw connection 1437892

SACC-DSIV-M12-PLUG-9 THR - Housing screw connection 1417984

SACC-BP-M-M12-THR PP - Housing screw connection 1027661

SACC-FP-M-M12-THR PP - Housing screw connection 1027679

Your advantages

SACC-CI-M12MSR-5CON-L90 THR T - Contact carrier

1706603