PTCB BE PT 6
-
Base element
1567576
Base element, mounting type: DIN rail: TH 35 - 7.5 mm, rated current: 31 A
Product details
| General | |
| Note | The base element does not contain any electronic circuits. |
| Product type | Base element |
| Product family | CB BE |
| Mechanical service life | 25 insertion cycles |
| Insulation characteristics | |
| Overvoltage category | II (250 V AC / IEC 60934) |
| III (UL 1077, UL 1059) | |
| III (80 V DC / IEC 60934) | |
| Pollution degree | 2 (250 V AC / IEC 60934) |
| 3 (UL 1077, UL 1059) | |
| General | |
| Rated voltage | 240 V AC (IEC 60934) |
| 277 V AC (UL 1077) | |
| 277 V AC (UL 1059) | |
| 56 V DC (IEC 60934) | |
| 56 V DC (UL 1077) | |
| 56 V DC (UL 1059) | |
| Rated insulation voltage Ui | 250 V AC (IEC 60934) |
| 80 V DC (IEC 60934) | |
| 277 V AC (UL 1077) | |
| 277 V AC (UL 1059) | |
| Rated current IN | 31 A (UL 1059, without device circuit breaker) |
| 16 A (Main contacts 1-2, UL 1077 and IEC 60934) | |
| 1 A (Auxiliary contacts 3-4, without device circuit breaker) | |
| Rated surge voltage | 2.5 kV (IEC 60934, reinforced insulation between load and auxiliary circuit) |
| Insulation resistance Riso | > 100 MΩ (500 V DC) |
| Dielectric strength | 3000 V AC (between load circuit 1-2 and auxiliary circuit 3-4) |
| 1554 V AC (between open load contacts 1-2, auxiliary contacts 3-4) | |
| Indicator/remote signaling | |
| Connection name | Connection 3 / 4 |
| Connection 1 / 2 | |
| Connection method | Push-in connection |
| Stripping length | 12 mm |
| Conductor cross-section flexible | 0.5 mm² ... 10 mm² |
| Conductor cross-section rigid | 0.5 mm² ... 10 mm² |
| 1 mm² ... 10 mm² (direct plug-in) | |
| Conductor cross-section AWG | 20 ... 8 |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.5 mm² ... 6 mm² |
| 1 mm² ... 6 mm² (direct plug-in) | |
| Conductor cross-section flexible, with ferrule without plastic sleeve | 0.5 mm² ... 6 mm² |
| 1 mm² ... 6 mm² (direct plug-in) | |
| Connection 3 / 4 | |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross-section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross-section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 26 ... 16 |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.14 mm² ... 1.5 mm² |
| Conductor cross-section flexible, with ferrule without plastic sleeve | 0.14 mm² ... 1.5 mm² |
| Dimensional drawing |
|
| Width | 8.2 mm |
| Height | 122.9 mm |
| Depth | 54.1 mm |
| Complete module width | 8.2 mm |
| Complete module height | 122.9 mm |
| Complete module depth | 85.2 mm |
| Color | gray (RAL 7042) |
| Material | PA |
| Flammability rating according to UL 94 | V-0 |
| Insulating material group | I |
| Mechanical data | |
| Open side panel | No |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -30 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m (250 V AC / IEC 60934) |
| Humidity test | 96 h, 95 % RH, 40 °C |
| Shock (operation) | 30g (IEC 60068-2-27, Test Ea) |
| Vibration (operation) | 10 Hz ... 150 Hz, 20 cycles (IEC 60068-2-6, Test Fc) |
| 10 Hz ... 75 Hz (Amplitude ±0.35 mm; in accordance with IEC 60068-2-6, Test Fc) | |
| 75 Hz ... 150 Hz (8g) | |
| UL approval | |
| Identification | UL Recognized UL 1059 |
| UL Recognized UL 1077 | |
| CSA, Canada | |
| Identification | CSA C22.2 No. 235-04 |
| Standards/specifications | IEC 60934 |
| Note | 2019 |
| Standards/specifications | UL 1077 |
| Note | Additional protective devices for use in electrical equipment |
| Standards/specifications | UL 1059 |
| Note | Terminal blocks |
| Standards/specifications | CSA C22.2 No. 235-04 |
| Note | 2017 |
| Standards/specifications | IEC 60068-2-6 |
| Note | Environmental influences – Vibrations (sinusoidal) |
| Standards/specifications | EN 60068-2-27 |
| Note | Environmental influences – Shocks |
| Standards/specifications | EN 60068-2-78 |
| Note | Environmental influences – Moisture and heat, constant |
| Standards/specifications | DIN EN 50274 |
| Note | Touch protection and back-of-hand safety |
| Standards/specifications | IEC 60529 |
| Note | 2019 |
| Mounting type | DIN rail: TH 35 - 7.5 mm |
Your advantages
More space in the control cabinet: protection and signaling in an overall width of just 8 mm
Simple application setup due to bridging option to CLIPLINE complete terminal block system
Transparency regarding utilization and status with practical current monitoring and remote signaling
Easy handling from commissioning right through to maintenance due to clear functionality and switching state at all times