Transmit your I/O signals reliably to hard-to-reach or rotating stations with Wireless MUX.
You can install the Wireless MUX particularly quickly: Connect it, switch it on, and the signals will be transmitted wirelessly immediately. The connections are established and signals transmitted automatically due to the fixed assignment of the devices.
Wireless multiplexers: unpack, connect, and switch on
The wireless multiplexer transmits 16 digital and two analog signals bi-directionally, i.e., in both directions, which means that it can replace a 40-wire signal cable. The connection is monitored continuously during the process. If there is severe interference or the connection is interrupted, the outputs are reset to the defined LOW state. This is indicated on the module by a diagnostic LED. The link-quality display provides the user with constant information on the quality of the link.
Connection to the controller is quick and easy using existing input and output channels.
Ready to use: unpack, connect, and switch on
The wireless multiplexer is used wherever a small number of digital or analog input and output signals need to be exchanged wirelessly with a remote or movable station. Factory automation in particular is characterized by machine parts that are constantly in motion.
Replacement of slip rings, trailing cables, and cable conduits and drums.
Examples of use:
Control of moving machinery and systems, replacement of cable drums, and replacement of failure-prone and high-maintenance cable runs.
Examples of use:
Replacement of slip rings and control of remote, difficult to access, or moving system parts.
Example of use:
