TC-D25SUBF-AO8-EX-2PS-S800 - Module carrier

1061346

Termination Carrier for 8 single-channel MACX Analog (Ex i) signal conditioners for connection to the ABB S800 system AO845 (analog output) via the TU812 or TU854 with dual redundant power supply

This product needs further products for operation. Mandatory accessories

Product details

Set consists of

Notes on operation	For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Module carrier
Insulation characteristics: Air clearances and creepage distances
Insulation	Basic insulation
Overvoltage category	II
Pollution degree	2

Max. permissible current	1 A (Signal/channel)
Nominal voltage U_N	< 50 V DC (Per signal/channel)
Air clearances and creepage distances
Rated insulation voltage	30 V
Rated surge voltage	0.5 kV
Supported controller ABB S800 I/O
Suitable I/O card	AO845
Supply
Designation	Feed-in module
Note	Power supply via 2904673 TC-MACX-MCR-PTB power supply and error signaling module.
Fuse	2x 2.5 A Slow-blow (exchangeable)
Input voltage	24 V DC
Input voltage range	19.2 V DC ... 30 V DC
Input current	≤ 2 A
Redundant supply	yes, decoupled from diodes
Polarization and surge protection	Yes

Power supply
Connection method	Screw connection
Stripping length	7 mm
Number of connections	2
Number of positions	6
Conductor cross-section rigid	0.14 mm² ... 2.5 mm²
Conductor cross-section flexible	0.14 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Controller level
Connection method	D-SUB socket strip
Number of connections	1
Number of positions	25
X11
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	14
Note	For connecting 8 HART devices to HART multiplexers
X12
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	14
Note	For connecting a second Termination Carrier (additional 8 HART channels)

Status display	2x green LEDs (PWR1 and PWR2)

Width	148 mm
Height	170 mm
Depth	160 mm

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 70 °C (Please observe module specifications)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Shock	15g, according to IEC 60068-2-27
Vibration (operation)	2g, according to IEC 60068-2-6

UL, USA/Canada
Identification	UL 61010 Listed
	Class I, Div. 2, Groups A, B, C, D T4
	Class I, Zone 2, Group IIC

Air clearances and creepage distances
Standards/regulations	EN IEC 60664-1
Directive 2014/35/EU (EMV)
Standards/regulations	EN 6100-6-2
	EN 6100-6-4
Directive 2014/35/EU (EMV)
Standards/regulations	EN 60079-0
	EN 60079-7
	EN 60079-11

Mounting type	DIN rail mounting
Assembly note	No end clamp
Mounting position	vertical, horizontal

Commercial data

Item number	1061346
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Product key	DK2711
GTIN	4055626714769
Weight per piece (including packing)	1,916 g
Weight per piece (excluding packing)	1,916 g
Country of origin	DE

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	50 V	1 A

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	50 V	1 A

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	50 V	1 A

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	50 V	1 A

Environmental product compliance

Compatible products

Mandatory accessories

Accessories

ECLASS-13.0	27141152
ECLASS-15.0	27141152

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	77caf7b5-5356-4670-af28-6da636f05a5b

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TC-D25SUBF-AO8-EX-2PS-S800 - Module carrier

1061346

Product details

ECLASS

ETIM

UNSPSC

UL Listed

cUL Listed

cUL Listed

UL Listed

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TC-D25SUBF-AO8-EX-2PS-S800 - Module carrier 1061346

Product details

TC-C-MAX2-SC-31320000 - Cable set 2902425

TC-C-PTB3-SC-SET1 - Cable set 2905216

TC-C-PTB3-SC-SET3-L253 - Cable set 1085779

ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail bus connector 2695439

ME 17,5 TBUS 1,5/ 5-ST-3,81 GY - DIN rail bus connector 1090049

ECLASS

ETIM

UNSPSC

Compatible products

TC-MACX-MCR-PTB - Power and error message module 2904673

CABLE-D25SUB/B/S/200/KONFEK/S - Cable 2302159

MACX MCR-EX-IDS-I-I - Output signal conditioner 2908060

MACX MCR-EX-IDS-I-I-SP - Output signal conditioner 2908062

MACX MCR-EX-SL-IDSI-I - Output signal conditioner 2865405

MACX MCR-EX-SL-IDSI-I-SP - Output signal conditioner 2924032

MACX MCR-IDS-I-I - Output signal conditioner 2908063

MACX MCR-IDS-I-I-SP - Output signal conditioner 2908064

MACX MCR-SL-IDSI-I - Output signal conditioner 2865971

MACX MCR-SL-IDSI-I-SP - Output signal conditioner 2924223

ZBF 15:UNBEDRUCKT - Zack Marker strip, flat 0811202

EMLF (108XE)R - Label, highly flexible 0800549

TC-C-PTB3-SC-SET3-L253 - Cable set 1085779

MACX MCR-S-MUX - HART multiplexer 2865599

FLK 14/EZ-DR/ 200/KONFEK - Cable 2288930

TC-D25SUBF-AO8-EX-2PS-S800 - Module carrier

1061346