The terminal is designed for use within an Inline station. The terminal enables the 120 V AC supply voltage to be fed into a 120 V AC area of the Inline station. An end terminal, which must be used to terminate the 120 V AC area, is supplied as standard with the feed-in terminal.
IB IL 120 PWR IN-PAC
-
Feed-in module
2861454
Inline power terminal block, complete with accessories (connector and labeling field), without fuse, 120 V AC
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 36.6 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Note on application | |
| Note on application | Only for industrial use |
| Inline local bus | |
| Number of interfaces | 2 |
| Connection method | Inline data jumper |
| Transmission speed | 500 kbps / 2 Mbps |
| Module | |
| ID code (dec.) | none |
| ID code (hex) | none |
| Register length | 0 Byte |
| Required parameter data | 0 Byte |
| Required configuration data | 0 Byte |
| Product type | I/O component |
| Product family | Inline |
| Type | modular |
| Special properties | 120 V AC |
| Insulation characteristics | |
| Protection class | I (IEC 61140, EN 61140, VDE 0140-1) |
| Maximum power dissipation for nominal condition | 0 W |
| Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min |
| 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min | |
| 7.5 V supply (bus logics) / I/O area 120 V AC 2500 V AC 50 Hz 1 min | |
| Routine test 1200 V AC 50 Hz 1 min | |
| I/O area 120 V AC/PE 500 V AC 50 Hz 1 min | |
| Output / Phase 500 V AC 50 Hz 1 min | |
| Protective circuit | Surge protection |
| Supply | |
| I/O voltage | 120 V AC |
| I/O voltage range | 108 V AC ... 135 V AC (including all tolerances, including ripple) |
| Residual ripple | ± 12 V |
| Max. current consumption | 8 A |
| Potentials: I/O supply | |
| Supply voltage | 120 V AC (via Inline connector) |
| Supply voltage range | 108 V AC ... 135 V AC |
| Connection technology | |
| Connection name | Inline connector |
| Conductor connection | |
| Connection method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
| Inline connector | |
| Connection method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 75 % ... 85 % |
| Permissible humidity (storage/transport) | 75 % ... 85 % |
| Mounting type | DIN rail mounting |
Your advantages
Supplying the L phase (120 V AC)