ELR H3-I-PT- 24DC/500AC-0,6 - Hybrid motor starter - 2903920

Product properties

Product type	Hybrid motor starters
Product family	CONTACTRON
Operating mode	100% operating factor

Electrical properties

Number of phases	3
Motor starter type	Direct starter
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation for nominal condition	0.4 W
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	1.5 W
Minimum power dissipation	1.1 W
Coordination type	1
Supply
Rated control circuit supply voltage U_S	24 V DC
Control supply voltage range	19.2 V DC ... 30 V DC
Rated control supply current I_S	40 mA
Protective circuit	Surge protection
Protective circuit		Reverse polarity protection
Insulation characteristics
Rated insulation voltage	500 V
Rated surge voltage	6 kV
Overvoltage category	III
Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC (e.g., 230/400 V AC, 277/480 V AC)
		Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC

Input data

Control
Input name	Control input
Rated actuating voltage U_C	24 V DC
Triggering voltage range	19.2 V DC ... 30 V DC
Rated actuating current I_C	5 mA (Input type 1)
Switching threshold	9.6 V (“0” signal)
	19.2 V (“1” signal)
Typical turn-off time	< 30 ms
Protective circuit	Reverse polarity protection

Output data

AC output
Rated operating voltage U_e	500 V AC
Operating voltage range	42 V AC ... 550 V AC
Rated operating current I_e	0.6 A (AC-51)
Rated operating current I_e		0.6 A (AC-53a)
Mains frequency	50/60 Hz
Load current range	75 mA ... 600 mA (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
Cooling time	20 min (for auto reset)
Leakage current	0 mA
Protective circuit	Surge protection
Acknowledge output
Note	Confirmation: floating change-over contact, signal contact
Contact switching type	1 changeover contact
Switching capacity in accordance with IEC 60947-5-1	3 A (230 V, AC15)
Switching capacity in accordance with IEC 60947-5-1		2 A (24 V (DC13))

Connection data

Control circuits
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Load circuit
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Signaling

Status display	LED (yellow)
Operating voltage display	Green LED
Error indication	Red LED

Dimensions

Width	22.5 mm
Height	107.5 mm
Depth	114 mm

Material specifications

Flammability rating according to UL 94	V0 (Housing)

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m

Approvals

UKCA
Certificate	UKCA-compliant
UL approval
Certificate	NLDX.E228652
UL data
SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
	5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA	0.6 A (500 V AC)
Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
	30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code	NLDX / NRNT

Standards and regulations

Standards/regulations
Standards/regulations	IEC 60947-1
	IEC 60947-4-2

Mounting

Mounting type	DIN rail mounting
Assembly note	alignable, for spacing see derating
Mounting position	vertical (horizontal DIN rail, motor output below)

Item number	2903920
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CK07
Product key	DK7421
Catalog page	Page 35 (C-5-2019)
GTIN	4046356771436
Weight per piece (including packing)	227.24 g
Weight per piece (excluding packing)	217.7 g
Customs tariff number	85371098
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	828fb937-38d9-42e4-88bf-eb49fb58bbf1

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H3-I-PT- 24DC/500AC-0,6 - Hybrid motor starter

2903920

Product details

ECLASS

ETIM

UNSPSC

IECEE CB Scheme

EAC

UL Listed

CCC

cUL Listed

cUL Listed

UL Listed

CCC

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H3-I-PT- 24DC/500AC-0,6 - Hybrid motor starter 2903920

Product details

ECLASS

ETIM

UNSPSC

Compatible products

BRIDGE-PT 1 - Bridge 1161777

BRIDGE-PT 2 - Bridge 2904490

BRIDGE-PT 3 - Bridge 2904491

BRIDGE-PT 4 - Bridge 2904492

BRIDGE-PT 5 - Bridge 2904493

BRIDGE-PT 6 - Bridge 2904494

BRIDGE-PT 7 - Bridge 2904495

BRIDGE-PT 8 - Bridge 2904496

BRIDGE-PT 9 - Bridge 2904497

BRIDGE-PT 10 - Bridge 2904498

BRIDGE-PT 1-1M - Bridge 1161778

BRIDGE-PT-2-1M - Bridge 1049407

BRIDGE-PT-3-1M - Bridge 1049408

BRIDGE-PT-4-1M - Bridge 1049409

BRIDGE-PT-5-1M - Bridge 1049413

BRIDGE-PT-2-2M/0,3M - Bridge 1107649

BRIDGE-PT-3-2M/0,3M - Bridge 1107650

BRIDGE-PT-4-2M/0,3M - Bridge 1107644

US-EMLP (15X5) - Plastic label 0828790

UC-EMLP (15X5) - Plastic label 0819301

ELR H3-I-PT- 24DC/500AC-0,6 - Hybrid motor starter

2903920