The PAS-1 equipotential busbar is designed for main equipotential bonding in accordance with DIN VDE 0185. PAS-1 has a comb-shaped contact bar. Nine loose slide-on terminal blocks are used to connect circular conductors with a cross-section of 2.5 mm2 to 95 mm2. In addition, a 4 x 30 mm steel strip can be connected with the double terminal block (2), see figure below. Inside the sealable plastic cover there is a label where the designations of the connected conductors can be entered. PAS-1 carries the VDE mark as per DIN VDE 0618-1:2023-03.
VDE Zeichengenehmigung
Approval ID: 73234| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| keine | ||||
| Mark approval certificate | - 95 | |||