Capacity module - QUINT4-CAP/24DC/20/16KJ/USB
1065635

QUINT capacity module, with maintenance-free energy storage based on double-layer capacitor, DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A / 16 kJ incl. mounted UTA 107 universal DIN rail adapter

Downloads

Product Details




Input voltage 24 V DC (SELV)
Input voltage range 22.5 V DC ... 30 V DC
Fixed backup threshold < 22 V DC
> 30 V DC
Current consumption IN (UN, IOUT = IN, Icharge = 0) 20 A
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max) 30 A
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) 0.1 A (No-load)
Current consumption Icharge (UN, IOUT = 0, Icharge = max) 10 A (charging process)
Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max) 599 W
Power consumption PN (UN, IOUT = IN, Icharge = 0) 488 W
Power consumption Pcharge (UN, IOUT = 0, Icharge = max) 244 W
Buffer time 4 min. (2.5 A)
30 s (20 A)
Charging time approx. 6.3 min. (2.5 A)
approx. 2.1 min. (10 A)
Recharging time approx. 5.4 min. (2.5 A)
approx. 1.4 min. (10 A)
Inrush current ≤ 7 A (≤ 4 ms)
Switch-on time 1 ms (buffer mode)
Internal input fuse no
Dielectric strength max. 35 V DC (Reverse polarity protection)
Voltage drop, input/output 0.5 V DC
Signal state Parallel port
Connection labeling 3.6
Channel DI / DO (digital input / digital output)
Switching voltage < 1 V
24 V (UN - 1 V (typical))
Switching input description Connection terminal block communication, parallel operation
State (configurable) Parallel Mode
State condition (configurable) Not active: none
Active:
Output: buffer mode <1 V
Output: mains operation 24 V (UN-1 V (typical))
Input: Connected with SGnd: start buffer mode
Current carrying capacity 2 mA
Reference potential Different device, parallel port IN/OUT
Signal state Remote
Connection labeling 3.5
Channel DI (digital input)
State (configurable) Remote
State condition Remote
Low signal <3 kΩ to SGnd
High signal open (>470 k between Remote and SGnd)
Signal - state assignment low - active
Reference potential 3.7 (SGnd, identical to1.3, 1.4, 2.2)

Efficiency > 98 % (with charged energy storage device)
Connection in parallel yes
Connection in parallel max. 4
Connection in series No
Mains operation
Output voltage 24 V DC
Output current IN 20 A
Static Boost (IStat.Boost) 25 A
Output power POUT (UN, IOUT = IN) 480 W
Output power POUT (UN, IOUT = Istat.Boost) 600 W
Power dissipation Nominal load (UN, IOut = IN, ICharge = 0) 10 W
Short-circuit-proof yes (with input fuse)
Idling-proof yes
Battery operation
Output voltage 24 V DC
Output current IN 20 A
Static Boost (IStat.Boost) 25 A
Output power POUT (UN, IOUT = IN) 480 W
Output power POUT (UN, IOUT = Istat.Boost) 600 W
Short-circuit-proof yes
Idling-proof yes
Signal state Alarm
Connection labeling 3.3
Channel DO (digital output)
Switching output Transistor
State (configurable) Group alarm
State condition (configurable) Alarm
Output can be loaded max. 20 mA
State - signal assignment active - low
Reference potential 3.7 (SGnd, identical to1.3, 1.4, 2.2)
LED status indicator red (Alarm)
Signal state Ready
Connection labeling 3.4
Channel DO (digital output)
Switching output Transistor
State (configurable) Ready
State condition (configurable) State of charge = 100% or buffer mode
Output can be loaded max. 20 mA
State - signal assignment active - high
Reference potential 3.7 (SGnd, identical to1.3, 1.4, 2.2)
LED status indicator Green (state of charge - SOC)
Signal state UIN OK
Connection labeling 3.1, 3.2
Channel DO (digital output)
Switching output Electronic relays (OptoMOS)
State (configurable) UIn OK
State condition (configurable) UIn > 22,5 V DC, UIn < 30 V DC
Output can be loaded 300 mA
State - signal assignment active - high
LED status indicator green (UIn OK)
Signal ground SGnd
Connection labeling 3.7
Switching voltage 0 V
Current carrying capacity max. 60 mA
Function Signal ground
Reference potential 3.3 Alarm, 3.4 Ready, 3.5 Remote

Capacity 16 kJ
Buffer time 4 min. (2.5 A)
30 s (20 A)
Storage medium Double-layer capacitor

Input
Position 1.x
Conductor connection
Connection method Screw connection
rigid 0.2 mm² ... 6 mm²
flexible 0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve 0.25 mm² ... 4 mm²
flexible with ferrule with plastic sleeve 0.25 mm² ... 4 mm²
rigid (AWG) 24 ... 10
Stripping length 8 mm
Torque 0.5 Nm ... 0.6 Nm
Drive form screw head Slotted L
2-conductor connection
rigid 0.2 mm² ... 1.5 mm²
flexible 0.2 mm² ... 1.5 mm²
flexible with TWIN ferrule with plastic sleeve 0.5 mm² ... 2.5 mm²
Output
Position 2.x
Conductor connection
Connection method Screw connection
rigid 0.2 mm² ... 6 mm²
flexible 0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve 0.25 mm² ... 4 mm²
flexible with ferrule with plastic sleeve 0.25 mm² ... 4 mm²
rigid (AWG) 24 ... 10
Stripping length 8 mm
Torque 0.5 Nm ... 0.6 Nm
Drive form screw head Slotted L
2-conductor connection
rigid 0.2 mm² ... 1.5 mm²
flexible 0.2 mm² ... 1.5 mm²
flexible with TWIN ferrule with plastic sleeve 0.5 mm² ... 2.5 mm²
Signal
Position 3.x
Conductor connection
Connection method Push-in connection
rigid 0.2 mm² ... 1 mm²
flexible 0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve 0.2 mm² ... 1 mm²
flexible with ferrule with plastic sleeve 0.2 mm² ... 0.75 mm²
rigid (AWG) 24 ... 18
Stripping length 8 mm

Interface USB (Modbus/RTU)
Number of interfaces 1
Connection method MINI-USB Type B
Connection marking 5.1
Locking Screw
Transmission physics USB 2.0
Topology Point-to-point
Transmission speed 9600 baud ... 115200 baud (Default: 115200 baud)
Transmission length max. 5 m
Access time ≤ 2 s
Chipset Silicon Labs CP2104-F03-GM
Electrical isolation Yes, UL approved

Insulation voltage input, output / housing 500 V

Product type Capacity module
MTBF (IEC 61709, SN 29500) 1839057 h (25 °C)
1191809 h (40 °C)
597144 h (60 °C)
Insulation characteristics
Protection class III (Special application (SELV))
Overvoltage category II
Degree of pollution 2

Width 244 mm
Height 130 mm
Depth 125 mm
Installation dimensions
Installation distance right/left 0 mm / 0 mm
Installation distance top/bottom 50 mm / 50 mm

Mounting type DIN rail mounting
Assembly instructions alignable: horizontally 0 mm, vertically 50 mm
Mounting position horizontal DIN rail NS 35, EN 60715

Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
Housing material Metal

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 60 °C (> 40 °C Derating: 1 %/K)
Ambient temperature (storage/transport) -40 °C ... 60 °C
Ambient temperature (start-up type tested) -40 °C
Maximum altitude ≤ 4000 m
Climatic class 3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation) ≤ 95 %
Shock 30g, 18 ms per spatial direction (in accordance with IEC 60068-2-27)
Vibration (operation) 0,7g

Overvoltage category
EN 61010-1 II (≤ 4000 m)
EN 61010-2-201 II (≤ 4000 m)
UL 60950-1 II (≤ 4000 m)
Protective extra-low voltage
Standards/specifications IEC 61010-1 (SELV)
IEC 61010-2-201 (PELV)

UL
Identification UL 61010-1
UL
Identification UL 61010-2-201
UL
Identification UL 121201
UL
Identification CAN/CSA-C22.2 No. 61010-1-12
UL
Identification CAN/CSA C22.2 No. 61010-2-201:14
UL
Identification CSA C22.2 No. 213-17 Class I, Devsion 2, Groups A, B, C, D (Hazardous Location)
UL
Identification IEC 61010-1
IEC 61010-2-201
EN 61010-1
EN 61010-2-201

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Interference emission Noise emission in accordance with EN 61000-6-3 and EN 61000-6-4
Noise emission EN 55016
EN 61000-6-3
Noise immunity Device immunity in accordance with EN 61000-6-2
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge 6 kV (Test Level 3)
Discharge in air 8 kV (Test Level 3)
Comments Criterion B
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 6 GHz
Test field strength 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input 2 kV (Test Level 3 - asymmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
Signal 2 kV (Test Level 3 - asymmetrical)
Comments Criterion A
Surge voltage load (surge)
Standards/regulations EN 61000-4-5
Signal 1 kV (Test Level 2 - asymmetrical)
Comments Criterion B
Input/Output 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.

Item number 1065635
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C15
Product Key CMUI43
GTIN 4055626728247
Weight per Piece (including packing) 3,360 g
Weight per Piece (excluding packing) 2,860 g
Customs tariff number 85322900
Country of origin CN


ECLASS

ECLASS-9.0 27049201
ECLASS-11.0 27040692

ETIM

ETIM 8.0 EC002850

UNSPSC

UNSPSC 21.0 26111700

UL Listed

Approval ID: FILE E 123528

cUL Listed

Approval ID: FILE E 123528

EAC

Approval ID: D-DE.GB09.V.00570/20

cUL Listed

Approval ID: FILE E 123528

UL Listed

Approval ID: FILE E 123528

EAC

Approval ID: RU*DE*HB54.B05799/20

EAC

Approval ID: RU*DE*HB54.B05799/20

cUL Listed

Approval ID: FILE E 199827

UL Listed

Approval ID: FILE E 199827

UL Listed

Approval ID: FILE E 199827

cUL Listed

Approval ID: FILE E 199827

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 25;
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

Convenient shutdown of PCs
Maintenance-free with a long service life
Space savings, thanks to the compact design
Long buffer time, thanks to high memory capacity
Lockable USB interface for connecting to industrial PCs, for example