This connection element is intended to be part of a modular signal tower and is used to electrically connect the tower. According to your requirements, a signal tower may comprise any combination of up to five signal elements. You may use up to five optical signal elements or up to four optical and one audible signal element. Only use an audible signal element as the top element. A bayonet locking system establishes the mechanical and electrical connection between the elements. Please note that PSD-S 50 signal towers (50 mm diameter) are not mechanically compatible with PSD-S signal towers (70 mm diameter).
PSD-S 50 CE BR-SM/HCR
-
Connection element
1018742
Base for vertical assembly
Product details
| Note on application | |
| Note on application | Only for industrial use |
| Product type | Assembly element |
| Product family | PSD-S 50 |
| Scope of supply | End cover and seal |
| Number of mountable signal elements | max. 5 |
| without ferrule | |
| Connection method | Push-in connection |
| Conductor cross-section, flexible | 0.5 mm² ... 1.5 mm² |
| Conductor cross-section, flexible [AWG] | ... 16 |
| Stripping length | 7 mm |
| With ferrule | |
| Connection method | Push-in connection |
| Conductor cross-section, flexible | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible [AWG] | ... 16 |
| Stripping length | 7 mm |
| solid | |
| Connection method | Push-in connection |
| Conductor cross-section, rigid | 0.5 mm² ... 1.5 mm² |
| Stripping length | 7 mm |
| Dimensional drawing |
|
| Width | 67 mm |
| Height | 107 mm |
| Color | black |
| Material | PA-GF |
| Ambient conditions | |
| Degree of protection | IP65 (when installed) |
| Ambient temperature (operation) | -30 °C ... 60 °C |
| Mounting type | Base mounting (Seal enclosed) |
| Mounting position | any |
Compatible products
Your advantages
Connection element for mounting on a mounting surface (floor), junction box, or bracket
Push-in connection technology
Degree of protection: IP65, when mounted