ECOR-1-BSC2-RT/2X21 - Relay base

1027546

ECOR-1... relay base, for miniature power relays or miniature switching relays with 1 or 2 changeover contacts, bolt connection, for mounting on NS 35/7,5.

This product needs further products for operation. Mandatory accessories

Product details

Notes on operation	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
Notes on operation	The outputs are not suitable for switching different outer conductors.
Notes on operation	The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Notes on operation	At least a basic level of insulation is maintained against adjacent modules in the DIN rail direction. If the application has higher requirements on the insulation (reinforced insulation), then these must be realized through suitable measures (e.g. partition plates).

Product type	Relay socket
Product family	ESSENTIAL edition
Operating mode	100% operating factor
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category	III
Pollution degree	2

Nominal voltage U_N	≤ 230 V AC/DC
Nominal current I_N	10 A
Test voltage relay winding/relay contact	2 kV_rms (50 Hz, 1 min.)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	4 kV

Input side
Connection method	Bolt connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section rigid (2 conductors with same cross section)	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible (2 conductors with same cross section)	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	14
Tightening torque	0.5 Nm ... 0.7 Nm
Output side
Connection method	Bolt connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section rigid (2 conductors with same cross section)	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible (2 conductors with same cross section)	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	14
Tightening torque	0.5 Nm ... 0.7 Nm

Width	15.8 mm
Height	71.5 mm
Depth Retaining bracket	58.1 mm (with retaining bracket)

Color	traffic grey B (RAL 7043)

Ambient conditions
Degree of protection	IP20
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (storage/transport)	-25 °C ... 85 °C
Altitude	≤ 2000 m

Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 50178

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Commercial data

Item number	1027546
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	DKF
Product key	DKF312
GTIN	4055626522210
Weight per piece (including packing)	35.297 g
Weight per piece (excluding packing)	32.425 g
Customs tariff number	85366990
Country of origin	CN

Classifications

Approvals

Environmental product compliance

Compatible products

Mandatory accessories

Accessories

PHOENIX CONTACT Middle East FZ LLC

1201N-1206N, Dubai Science Park Towers - North, P.O. Box 345002, Dubai, United Arab Emirates

Ask a Question 800-7463649 info-me@phoenixcontact.com

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECOR-1-BSC2-RT/2X21 - Relay base

1027546

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

EAC

cULus Recognized

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECOR-1-BSC2-RT/2X21 - Relay base 1027546

Product details

ECLASS

ETIM

UNSPSC

Compatible products

REL-MR-BL- 12DC/21HC - Single relay 1109537

REL-MR-BL- 48DC/21HC - Single relay 1109538

REL-MR-BL-110DC/21HC - Single relay 1109539

REL-MR-BL- 24AC/21HC - Single relay 1109540

REL-MR-BL-115AC/21HC - Single relay 1109542

REL-MR-BL- 12DC/21-21 - Single relay 1109543

REL-MR-BL- 24DC/21-21 - Single relay 2906286

REL-MR-BL- 48DC/21-21 - Single relay 1109544

REL-MR-BL-110DC/21-21 - Single relay 1109545

REL-MR-BL- 24AC/21-21 - Single relay 1109546

REL-MR-BL-115AC/21-21 - Single relay 1109569

REL-MR-BL-230AC/21-21 - Single relay 2906287

REL-MR-BL- 24DC/21HC - Single relay 2906285

REL-MR-BL-230AC/21HC - Single relay 2906288

REL-MR-BL-24DC/21HC/MS - Single relay 2908180

REL-MR-BL-24DC/21-21/MS - Single relay 2908181

DB 50- 90 BU - Wire bridge 2821180

DB 50- 90 BK - Wire bridge 2820916

DB 50- 90 GY - Wire bridge 2820929

ECOR-RH-1L - Relay retaining bracket 2907524

ECOR-RH-1H - Relay retaining bracket 2907523

MP 1 - Marker labels 2833631

DB 50- 90 GY - Wire bridge 2820929

ECOR-1-BSC2-RT/2X21 - Relay base

1027546