MACX MCR-S-MUX
-
HART multiplexer
2865599
HART Multiplexer for online configuration and diagnostics of HART-compatible field devices, as well as for continuous documentation of process variables and states with a PC or management system for mounting on NS 35/7.5 or NS 32
This product needs further products for operation.
Mandatory accessories
Free download available.
Downloads
Product details
| Product type | Multiplexer |
| Error monitoring | Processor error: The "PWR" LED flashes; error in the HART communication: the "ERR" LED flashes |
| Electrical isolation HART signal/RS-485 | |
| Electrical isolation | 350 V AC |
| Electrical isolation HART signals/HART signals | |
| Electrical isolation | 100 V DC (capacitive) |
| Electrical isolation Supply/HART signal/RS-485 | |
| Electrical isolation | 300 V AC |
| Supply | |
| Supply voltage | 24 V DC |
| Supply voltage range | 18 V ... 31.2 V |
| Typical current consumption | 55 mA |
| Nominal power consumption | 1.35 W |
| Undervoltage monitoring | Yes (no faulty devices / output states) |
| HART | |
| Designation | HART FSK |
| Channels | 16 or 32; adjustable using a switch |
| Connection method | Flat-ribbon cable, 14-pos. (inclusive) |
| HART specification | HART Field Communication Protocol Rev. 6.0 (downward compatible up to Rev 4.0); FSK Physical Layer Specification (Rev. 8.1) |
| Data transmission display | Two yellow "Tx" and "Rx" "HART" LEDs |
| Display error | Red "ERR" LED (flashes in case of an error in the HART bus) |
| RS-485 | |
| Number | 1 |
| Connection method | D-SUB-9 female connector |
| Designation | RS-485 |
| Data flow control/protocols | Compatible with OPC HART server, PDM, PRM, and FDT/DTM |
| Number of HART multiplexers per bus segment | max 31 |
| Address setting | 0...127; using a rotary switch at the front |
| Serial transmission speed | 9600 / 19200 / 38400 / 57600 [bps]; via rotary switch at the front |
| Transmission length | ≤ 1200 m |
| Display | Two yellow "Tx" and "Rx" "RS-485" LEDs |
| Operating voltage display | Green "PWR" LED |
| Dimensional drawing |
|
| Width | 35.2 mm |
| Height | 108.8 mm |
| Depth | 114.5 mm |
| Color | gray (RAL 7042) |
| Flammability rating according to UL 94 (Housing) | V0 (Housing) |
| Ambient conditions | |
| Ambient temperature (operation) | -20 °C ... 60 °C (aligned) |
| -20 °C ... 70 °C (Stand-alone device) | |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Max. permissible relative humidity (operation) | ≤ 95 % (non-condensing) |
| CE | |
| Certificate | CE-compliant |
| Mounting type | DIN rail mounting |
Your advantages
Supports online configuration and diagnostics for the connected HART-compatible field devices
Communication via software tool (e.g., HART OPC server) using RS-485 interface
Up to 128 HART multiplexers on one PC interface
32 HART channels per multiplexer
Continuous documentation of process variables and states
Electrical isolation between auxiliary voltage, RS-485 bus, and the HART channels
HART field devices are accessed parallel to the transmission of the measurement signal without affecting measured value processing
HART field devices connected via universal HART connection boards; direct connection if processing non-Ex signals, with separate Ex i signal isolator connected upstream if processing Ex signals
Power supply via HART connection board