PSI-MOS-RS232/FO 660 E - FO converters - 2708368

Notes

Note on application
Note on application	Only for industrial use
Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product properties

Product type	Media converter
Product family	PSI-MOS
MTTF	1093 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
	468 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
	194 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
MTBF	485 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
	91 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))

Electrical properties

Electrical isolation	VCC // V.24 (RS-232)
Maximum power dissipation for nominal condition	2.4 W
Test voltage data interface/power supply	1.5 kV_rms (50 Hz, 1 min.)
Supply
Supply voltage range	18 V DC ... 30 V DC
Nominal supply voltage	24 V DC (in acc. with UL)
Typical current consumption	100 mA (24 V DC)
Max. current consumption	120 mA

Output data

Switching
Output name	Relay output
Output description	Alarm output
Number of outputs	1
Maximum switching voltage	60 V DC
	42 V AC
Limiting continuous current	0.46 A

Connection data

Supply
Connection method	COMBICON plug-in screw terminal block
Tightening torque	0.56 Nm ... 0.79 Nm

Interfaces

Bit distortion, input	± 35 % (permitted)
Bit distortion, output	< 6.25 %
Signal	Modbus
Transmission channels	2 (1/1), RxD, TxD, full duplex
Data: optical FO
No. of channels	1
Transmit capacity, minimum	-4.6 dBm (980/1000 µm)
Transmit capacity, minimum		-16.6 dBm (200/230 µm)
Transmission length incl. 3 dB system reserve	100 m (F-P 980/1000 230 dB/km with quick mounting connector)
Transmission length incl. 3 dB system reserve		800 m (F-K 200/230 10 dB/km with quick mounting connector)
Transmission protocol	Transparent to protocol for RS-232 interface
Connection method	F-SMA
Wavelength	660 nm
Minimum receiver sensitivity	-31.2 dBm
Transmission medium	Polymer fiber
Transmission medium		PCF fiber
Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Serial transmission speed	4.8 Kbps ... 115.2 Kbps
Connection method	D-SUB 9 plug
Transmission length	≤ 15 m
Single conductor/terminal point, rigid	0.2 mm² ... 2.5 mm²
Single-wire/terminal point, flexible	0.2 mm² ... 2.5 mm²
Max. AWG conductor cross section, flexible	14
Min. AWG conductor cross section, flexible	24
Single-wire/terminal point, rigid AWG max.	14
Single-wire/terminal point, rigid AWG min.	24
Transmission medium	Copper
File format/coding	UART (11 Bit, NRZ)
Data direction switching	Automatic control

Dimensions

Width	35 mm
Height	99 mm
Depth	105 mm

Material specifications

Color (Housing)	green (RAL 6021)
Material (Housing)	PA 6.6-FR

Cable/line

FO cable
Fiber types	980/1000 µm
	200/230 µm
	Polymer fiber
	PCF fiber

Mechanical tests

Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6	: 5g, 10...150 Hz, 2.5 h, in XYZ direction
Shock in accordance with EN 60068-2-27/IEC 60068-2-27	: 15g, 11 ms period, half-sine shock pulse

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation)	30 % ... 95 % (non-condensing)

Approvals

CE
Certificate	CE-compliant
ATEX
Identification	 II 3 G Ex nA nC IIC T4 Gc X
Note	Please follow the special installation instructions in the documentation!
ATEX, FO interface
Identification	 II (2) G [Ex op is Gb] IIC
Identification		 II (2) D [Ex op is Db] IIIC
Certificate	PTB 06 ATEX 2042 U
Note	Please follow the special installation instructions in the documentation!
UL, USA/Canada
Identification	Class I, Zone 2, AEx nc IIC T5
		Class I, Zone 2, Ex nC nL IIC T5 X
		Class I, Div. 2, Groups A, B, C, D
KC approval for South Korea
Certificate	KCC-REI-PCK-FL2708368
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A
Shipbuilding
Identification	DNV GL
Shipbuilding data
Temperature	B
Humidity	A
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise immunity	EN 61000-6-2:2005
Noise emission
Standards/regulations	EN 55011
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Field intensity	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2 kV
Signal	± 2 kV
Comments	Criterion B
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Input	± 0.5 kV
Signal	± 1 kV
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Comments	Criterion A
Voltage	10 V
Emitted interference
Standards/regulations	EN 55011
Comments	Class A, industrial applications
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Standards and regulations

Free from substances that could impair the application of coating	VDMA 24364:2018-05

Mounting

Item number	2708368
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DNC
Product key	DNC215
Catalog page	Page 439 (C-6-2019)
GTIN	4017918974060
Weight per piece (including packing)	238.2 g
Weight per piece (excluding packing)	233.3 g
Customs tariff number	85176200
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	1a269874-d899-4b90-936b-bb96ad4cbfb3

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSI-MOS-RS232/FO 660 E - FO converters

2708368

Product details

ECLASS

ETIM

UNSPSC

DNV GL

KC

cULus Recognized

ATEX

ATEX

cUL Listed

UL Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSI-MOS-RS232/FO 660 E - FO converters 2708368

Product details

ECLASS

ETIM

UNSPSC

Compatible products

PSM-SET-FSMA/4-KT - FO connectors 2799720

PSM-SET-FSMA/4-HCS - FO connectors 2799487

FL FOC PN-B-980/1000 - FO cable 2313397

PSM-LWL-RUGGED-980/1000 - FO cable 2744322

FL FOC PN-C-FLEX-980/1000 - FO cable 2313407

PSM-LWL-HCS-RUGGED-200/230 - FO cable 2799885

PSM-LWL-HCSO-200/230 - FO cable 2799445

QUINT4-SYS-PS/1AC/24DC/2.5/SC - Power supply 2904614

ME 17,5 TBUS 1,5/ 5-ST-3,81 GN - DIN rail bus connector 2709561

ME 17,5 TBUS 1,5/PP000-3,81 BK - DIN rail bus connector 2890014

ME 17,5 TBUS 1,5/ 5-ST-3,81 KMGY - DIN rail bus connector 2713645

PSM-POF-KONFTOOL - Assembly tool 2744131

PSM-HCS-KONFTOOL - Assembly tool 2799526

PSM-SET-FSMA-POLISH - Assembly tool 2799348

PSM-FO-POWERMETER - Measuring device 2799539

PSM-SET-FSMA-LINK/2 - Fiber optic coupling 2799416

SUBCON-PLUS 9/F - D-SUB bus connector 2744241

SUBCON-PLUS 9/M - D-SUB bus connector 2744018

SZS 0,4X2,5 VDE - Screwdriver 1205037

PSM-KA9SUB9/BB/2METER - Data cable 2799474

PSM-ME-RS232/RS485-P - Interface converter 2744416

FOC-HCS-RUGGED-1014/... - FO patch cable 1402191

Your advantages

PSI-MOS-RS232/FO 660 E - FO converters

2708368