DEK-REL- 24/1/S - Relay module

2964131

Relay terminal block, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage 24 V AC/DC, with integrated "manual", "0", "automatic" switch, for assembly on NS 35/7.5, terminal width 6.2 mm

Product details

Note on application	Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.

Product type	Relay Module
Product family	DEK
Application	Palm switch
Operating mode	100% operating factor
Mechanical service life	approx. 2x 10⁷ cycles
Insulation characteristics
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2
Data management status
Date of last data management	12.09.2025

Maximum power dissipation for nominal condition	0.16 W
Test voltage (Winding/contact)	2 kV AC (50 Hz, 1 min., winding/contact)

Coil side
Nominal input voltage U_N	24 V AC/DC
Input voltage range	19.2 V AC/DC ... 26.4 V AC/DC (20 °C)
Drive and function	monostable
Drive (polarity)	polarized
Typical input current at U_N	6.5 mA
Typical response time	5 ms
Typical release time	15 ms
Protective circuit	Bridge rectifier; Bridge rectifier
Operating voltage display	Yellow LED

Switching
Contact switching type	1 N/O contact
Type of switch contact	Double contact
Contact material	AgNi, hard gold-plated
Maximum switching voltage	250 V AC
	125 V DC
Minimum switching voltage	0.1 V
Limiting continuous current	3 A (5 A up to 35°C at 24 V DC)
Maximum inrush current	5 A
Min. switching current	1 mA
Interrupting rating (ohmic load) max.	72 W (at 24 V DC)
	60 W (at 48 V DC)
	50 W (at 60 V DC)
	50 W (at 110 V DC)
	750 VA (for 250 V AC)
	120 W (at 24 V DC - up to 35°)

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 14
Tightening torque	0.4 Nm ... 0.5 Nm

Width	6.2 mm
Height	80 mm
Depth	61 mm

Color	green (RAL 6021)

Ambient conditions
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

Standards/regulations	IEC 60947-5-1

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Commercial data

Item number	2964131
Packing unit	10 pc
Minimum order quantity	1 pc
Sales key	DK6
Product key	DK61A2
GTIN	4017918101015
Weight per piece (including packing)	23.15 g
Weight per piece (excluding packing)	20 g
Customs tariff number	85364190
Country of origin	CN

Classifications

Approvals

Environmental product compliance

Compatible products

Accessories

Your advantages

Just 6.2 mm wide

Safe isolation between coil and contact side

Increased contact reliability thanks to double contact

Max. switching current of 5 A

PHOENIX CONTACT s.r.o.

Námestie Mateja Korvína 1, 811 07 Bratislava. Zapísaná v Obchodnom registri Okresného súdu Bratislava III, vložka číslo 48994/B.

Ask a Question +421 2 3210 1470 obchod.sk@phoenixcontact.com

ECLASS-13.0	27371601
ECLASS-15.0	27371601

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	86afe8f8-d6b6-4867-a521-ddd908583979

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-REL- 24/1/S - Relay module

2964131

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

EAC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-REL- 24/1/S - Relay module 2964131

Product details

ECLASS

ETIM

UNSPSC

Compatible products

EB 2- DIK RD - Insertion bridge 2716693

EB 3- DIK RD - Insertion bridge 2716745

EB 4- DIK RD - Insertion bridge 2716758

EB 5- DIK RD - Insertion bridge 2716761

EB 10- DIK RD - Insertion bridge 2716774

EB 5- DIK BU - Insertion bridge 2716677

EB 10- DIK BU - Insertion bridge 2716680

EB 80- DIK BU - Insertion bridge 2715940

EB 80- DIK RD - Insertion bridge 2715953

D-DEK 1,5 GN - Separating plate 2716949

ZB 6:UNBEDRUCKT - Zack marker strip 1051003

ZB 6,LGS:FORTL.ZAHLEN - Zack marker strip 1051016

ZB 6/WH-100:UNBEDRUCKT - Zack marker strip 5060935

DIKD 1,5 - Initiator/actuator terminal block 2715979

Your advantages

DEK-REL- 24/1/S - Relay module

2964131