CAPAROC PM PN
-
Feed-in module
1110986
Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.
This product needs further products for operation.
Mandatory accessories
Free download available.
Downloads
Product details
| General | |
| Note | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| Product type | Device circuit breakers |
| Product family | CAPAROC |
| Type | Plug-in module |
| Number of slots | 4 |
| Insulation characteristics | |
| Protection class | III |
| Pollution degree | 2 |
| PROFINET | |
| Device function | PROFINET device |
| Specification | PROFINET-IO RT/IRT, Spec. 2.x |
| Conformance Class | Conformance Class C |
| Redundancy | MRP (Media Redundancy Protocol) |
| General | |
| Operating voltage | 10 V DC ... 30 V DC |
| Rated voltage | 12 V DC |
| 24 V DC | |
| Rated current IN | 45 A (Total current input) |
| Rated surge voltage | 0.5 kV |
| Tripping method | E (electronic) |
| Feedback resistance | max. 35 V DC |
| Dielectric strength | 35 V DC (Load circuit) |
| Efficiency | > 99 % |
| Closed circuit current I0 | typ. 85 mA (no load at 24 V) |
| Power dissipation | typ. 2 W (no load at 24 V) |
| < 3.6 W (at 40 A) | |
| Temperature derating | 45 A (Total current at 35°C) |
| 40 A (Total current at 40°C) | |
| 15 A (Total current at 50°C) | |
| MTBF (IEC 61709, SN 29500) | 3985174.15 h (at 25 °C with 21 % load) |
| 1760834.9 h (at 40°C with 34.25% load) | |
| 601892.76 h (at 35 °C with 100 % load) | |
| Voltage drop | 0.048 V (at 40 A) |
| Load circuit | |
| Undervoltage switch-off | ≤ 9.2 V DC (active) |
| ≥ 10.2 V DC (inactive) | |
| Overvoltage switch-off | ≥ 30.5 V DC (active) |
| ≤ 29.5 V DC (inactive) | |
| Main circuit IN+ | |
| Connection method | Push-in connection |
| Stripping length | 18 mm |
| Conductor cross-section AWG | 20 ... 8 |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.5 mm² ... 16 mm² |
| Conductor cross-section, flexible, with ferrule, without plastic sleeve | 0.5 mm² ... 16 mm² |
| Main circuit IN- | |
| Connection method | Push-in connection |
| Stripping length | 18 mm |
| Conductor cross-section AWG | 20 ... 8 |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.5 mm² ... 16 mm² |
| Conductor cross-section, flexible, with ferrule, without plastic sleeve | 0.5 mm² ... 16 mm² |
| System communication | |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross-section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 0.75 mm² |
| Conductor cross-section, flexible, with ferrule, without plastic sleeve | 0.2 mm² ... 1.5 mm² |
| PROFINET | |
| Maximum system extension | ≤ 16 (CAPAROC modules alignable) |
| Protocols supported | PROFINET |
| Connection X1 LED green | lit (connect) |
| Connection X1 LED yellow | lit (traffic) |
| Connection X2 LED green | lit (connect) |
| Connection X2 LED yellow | lit (traffic) |
| PROFINET bus fault (BF) LED red | lit (connection status not available) |
| flashing (сonnection status OK, no communication connection to PROFINET controller) | |
| off (active communication connection to PROFINET controller) | |
| PROFINET group error (SF) LED red | lit (PROFINET error) |
| off (no PROFINET error) | |
| PROFINET ready (RDY) LED green | lit (correct operation) |
| flashing (waiting for application startup) | |
| off (operation not correct) | |
| Power (PWR) LED green | lit (Supply voltage) |
| Power (PWR) LED red | lit (Supply voltage outside the nominal range) |
| Dimensional drawing |
|
| Width | 24.8 mm |
| Height | 132.4 mm |
| Depth | 111.3 mm (incl. DIN rail 7.5 mm) |
| Color | light gray (RAL 7035) |
| Material | PA 6 |
| PA 6 | |
| PA 6 | |
| PC | |
| Flammability rating according to UL 94 | V-0 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Altitude | ≤ 4000 m (amsl) |
| Humidity test | 96 h, 95 % RH, 40 °C |
| Shock (operation) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| 25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock) | |
| Vibration (operation) | 5g (10 Hz ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| UL approval | |
| Identification | UL/C-UL Listed UL 508 |
| UL 121201 Class I, Division 2, Groups A, B, C, D, T4A | |
| Corrosive gas test | |
| Identification | ISA S71.04.2013 G3 Harsh Group A |
| Standards/specifications | EN 61000-6-2 |
| Note | EMC – Immunity for industrial areas |
| Standards/specifications | EN 61000-6-3 |
| Note | EMC – Emission for residential, business and commercial properties and small operations |
| Standards/specifications | EN 60068-2-78 |
| Note | Environmental influences – Moisture and heat, constant |
| Standards/specifications | EN 50178 |
| Note | Equipping power installations with electronic equipment |
| Standards/specifications | EN 60068-2-6 |
| Note | Environmental influences – Vibrations (sinusoidal) |
| Standards/specifications | EN 60068-2-27 |
| Note | Environmental influences – Shocks |
| Mounting type | pluggable onto CAPAROC CR… current rail |
Your advantages
The benchmark that you can customize by selecting single signals and resets all the way to PROFINET communication
Particularly easy operation for everyone with tool-free assembly, direct feed-in to the busbar, and clear operating states
Exceptionally easy design-in thanks to the comprehensive digital data packet and PROFINET function blocks
Frequently asked questions
Is there a hardware tutorial in which the CAPAROC functions are explained?
How many current rails can be connected?
You can connect any number of current rails, but a maximum of 45 A can flow permanently.
How many circuit breaker modules can I switch downstream of a power module?
The number of circuit breaker modules depends on the power module used, the CAPAROC PD 0V potential distributors are passive modules and are not included in the number.
CAPAROC PM S-R - 20 circuit breaker modules
CAPAROC PM IOL - 20 channel...
View more
The number of circuit breaker modules depends on the power module used, the CAPAROC PD 0V potential distributors are passive modules and are not included in the number.
CAPAROC PM S-R - 20 circuit breaker modules
CAPAROC PM IOL - 20 channels
CAPAROC PM PN - 16 circuit breaker modules
What PROFINET system redundancy does CAPAROC PM PN meet?
The CAPAROC circuit breaker system meets PROFINET system redundancy S1.
However, it is possible to forward S2 signals to the controller via the CAPAROC circuit breaker system.
Where can I find the system manual for the CAPAROC circuit breaker system?
The user manual can be found in the download area for the respective product under “Manual”.
Does the CAPAROC circuit breaker system offer function blocks?
Yes, function blocks for the power module with PROFINET interface for the TIA Portal and CODESYS are available in the download area for the item, as well as in the PLCnext Store for PLCnext Engineer.
How many circuit breaker modules can I connect downstream of an infeed module?
CAPAROC PM S-R: 20 circuit breaker modules
CAPAROC PM IOL: 20 channels
CAPAROC PM PN: 16 circuit breaker modules
CAPAROC PM EIP: 16 circuit breaker modules
CAPAROC PM MB: 16 circuit breaker modules
CAPAROC PM EC: 16 circuit breaker modules
The channel LED flashes yellow twice every 4 seconds. What does this mean?
This means that the internal communication to the power module is interrupted or faulty.
Check that the modules are mounted correctly and that there is no gap between the modules. If communication is still disrupted, check the side contacts of the...
View more
This means that the internal communication to the power module is interrupted or faulty.
Check that the modules are mounted correctly and that there is no gap between the modules. If communication is still disrupted, check the side contacts of the first module (left) that is flashing, if they are bent, either too far into the module, not centered in the housing opening or otherwise damaged, replace the module.
Can I block the setting of the set currents?
The currents can be locked in different ways:
1. Programming lock: press the PWR button on the power module for > 3 seconds, the PWR LED flashes yellow 3 x, the settings are now locked. Pressing it again for > 3 seconds causes the LED to fla...
View more
The currents can be locked in different ways:
1. Programming lock: press the PWR button on the power module for > 3 seconds, the PWR LED flashes yellow 3 x, the settings are now locked. Pressing it again for > 3 seconds causes the LED to flash green 3 times and unlocks it again.
2. The lock can also be set and released via the communication interface; the operating lock can also be set here, which prevents operation and settings on the device. The lock can then only be released via the interface.