NLC-IO-06I-04QTP-01A
-
I/O extension module
2701072
I/O extension module for use with Nanoline base unit. Equipped with 6 digital input and 4 PNP digital output channels. A maximum of three I/O extension modules can be attached to a base unit.
Product details
| Product type | Extension module |
| Product family | Nanoline |
| Mounting position | Attaches to DB-9 connector on right-side of base unit |
| Supply: Module electronics | |
| Connection method | Screw connection |
| Supply voltage | 24 V DC |
| Supply current | typ. 50 mA |
| max. 90 mA | |
| Digital: | |
| Input name | Digital inputs |
| Description of the input | PNP/NPN |
| Number of inputs | 6 |
| Connection method | Screw connection |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 15 V DC ... 30 V DC |
| Nominal input voltage UIN | 24 V DC |
| Nominal input current at UIN | 5 mA DC (On) |
| < 100 µA (Off) | |
| Typical response time | 60 µs (on) |
| 70 µs (OFF) | |
| Digital: | |
| Output name | Digital outputs |
| Output description | PNP outputs |
| Connection method | Screw connection |
| Number of outputs | 4 |
| Protective circuit | Short-circuit and overload protection |
| Maximum output current per channel | 500 mA |
| Maximum output current per module / terminal block | 2 A |
| Maximum output current per module | 2 A |
| Nominal load, inductive | 12 VA ((1.2H)) |
| Nominal load, lamp | 12 W |
| Nominal load, ohmic | 12 W |
| Maximum operating frequency with ohmic nominal load | 100 Hz |
| Connection method | Screw connection |
| Dimensional drawing |
|
| Width | 40 mm |
| Height | 103.5 mm |
| Depth | 43 mm |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Degree of protection | IP20 |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 0 % ... 90 % |
| Mounting type | DIN rail mounting |
| DIN rail mounting | |
| Mounting position | Attaches to DB-9 connector on right-side of base unit |
Your advantages
Automatically recognized by the firmware
I/O modules are electrically isolated
Up to 3 modules can be added to the right side of a base unit
Can be powered from a secondary power supply