CLT-10P/2-MOV-230V-I-P
-
Surge protection plug
1669983
Surge protection plug, directly pluggable on 2 terminal blocks, with integrated status indicator on the module for a 2-wire floating signal circuit with high nominal current. Nominal voltage: 230 V AC
This product needs further products for operation.
Mandatory accessories
Product details
| Product type | Surge protection for MCR technology |
| Product family | CLIXTRAB |
| IEC test classification | C1 |
| C2 | |
| C3 | |
| D1 | |
| Type | DIN rail module, two-section, divisible |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Nominal voltage UN | 240 V AC |
| Connection method | pluggable |
| Dimensional drawing |
|
| Width | 10.3 mm |
| Height | 53.25 mm |
| Depth | 81.9 mm |
| Color | light gray (RAL 7035) |
| Flammability rating according to UL 94 | V-0 |
| Insulating material | PA 6.6+GV 20 % |
| Housing material | PA 6.6+GV 20 % |
| Mechanical data | |
| Open side panel | No |
| Maximum continuous operating voltage UC | 250 V DC |
| 275 V AC | |
| Rated current | 10 A AC (80 °C / 10 A AC C) |
| 6 A DC (80 °C / 6,3 A DC F) | |
| 10 A DC (80 °C / 10 A DC D01 gR) | |
| Operating effective current IC at UC | ≤ 2 µA |
| Protective conductor current IPE | ≤ 4 µA |
| Total discharge current ITotal (8/20) µs | 6 kA |
| Voltage protection level Up (line-earth) | ≤ 950 V (C1 - 1,5 kV / 750 A) |
| ≤ 1.2 kV (C2 - 6 kV / 3 kA) | |
| ≤ 900 V (C3 - 50 A) | |
| Response time tA (line-earth) | ≤ 100 ns |
| Input attenuation aE, asym. | typ. 0.3 dB (≤ 700 kHz/150 Ω) |
| Cut-off frequency fg (3 dB), asym. (signal ground) in 150 Ω system | typ. 2.4 MHz |
| Capacity (line-signal ground) | typ. 900 pF |
| Surge protection fault message | optical |
| Max. required back-up fuse | 10 A AC (C) |
| 6.3 A DC (F) | |
| 10 A DC (D01 gR) | |
| Impulse durability (line-earth) | C1 - 1,5 kV / 750 A |
| C2 - 6 kV / 3 kA | |
| C3 - 50 A | |
| D1 - 500 A |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 5g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| 10g (Half-sine / 8 ms / 3x ±X, ±Y, ±Z) | |
| 5g (Half-sine / 30 ms / 3x ±X, ±Y, ±Z) | |
| Vibration (operation) | 0,58g (5 ... 150 Hz / 5 h / X, Y, Z) |
| 1g (5 ... 2000 Hz / 5 h / X, Y, Z) | |
| Standards/specifications | IEC 61643-21 |
| Note | 2000 + corrigendum 2001 + A1:2008, modified + A2:2012 |
| Standards/specifications | EN 61643-21 |
| Note | 2001 + A1:2009 + A2:2013 |
| Mounting type | on base element |
Your advantages
Easy installation due to Push-in terminal blocks with pluggable surge protection
Superior system availability thanks to high-performance protective circuit with integrated overload protection
Quick and easy diagnostics with optional remote signaling for integration into digital infrastructures
Three become two - use just two terminal blocks to protect two signal paths in an overall width of 10.3 mm
Future-proof - meets international standards and directives, such as IEC 61643-21