The Inline adapter terminal (INTERBUS master) is designed to be aligned to the right of an Axiocontrol series PLCnext Control device. The Inline adapter terminal can be used to set up an Inline station for PLCnext Technology and to integrate INTERBUS devices.
AXC F IL ADAPT
-
PLC extension module
1020304
PLCnext Control Extension, PLC extension module, Right alignment, Adapter terminal, Extension module; interface: INTERBUS local bus (master): 1; Amount of process data: 4096 bit; degree of protection: IP20; Scope of supply: including bus base module and Inline connector; Supported controller: AXC F 1152, AXC F 1252, AXC F 2152; The product is being prepared for compliance with the Cyber Resilience Act (CRA).
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 12.2 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Note on application | Only for industrial use |
| Note on application | As things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA. |
| Color | gray (RAL 7042) |
| Inline local bus | |
| Number of interfaces | 1 |
| Connection method | Inline data jumper |
| INTERBUS local bus (master) | |
| Number of interfaces | 1 |
| Connection method | Inline data jumper |
| Transmission physics | Copper |
| Supported controller | AXC F 1152 |
| AXC F 1252 | |
| AXC F 2152 | |
| System limits | |
| Amount of process data (INTERBUS input/output data max.) | max. 4096 bit (INTERBUS input/output data) |
| Amount of process data (INTERBUS input data max.) | max. 2048 bit (INTERBUS input data) |
| Amount of process data (INTERBUS output data max.) | max. 2048 bit (INTERBUS output data) |
| Number of local bus devices that can be connected | max. 63 (observe current consumption) |
| Number of devices with parameter channel | max. 24 |
| Number of supported branch terminals with remote bus branch | - 0 (INTERBUS remote bus not supported) |
| Programming data | |
| Register length (master) | 512 Byte |
| Product type | I/O component |
| Product family | PLCnext Control Extension |
| Type | modular |
| Scope of supply | including bus base module and Inline connector |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Diagnostics messages | Bus error in INTERBUS yes |
| Peripheral fault in INTERBUS yes |
| Maximum power dissipation for nominal condition | 0.77 W |
| Potentials | |
| Protective circuit | Polarity reversal protection of the supply voltage; Polarity protection diode |
| Transient protection; Suppressor diode | |
| Potentials: 24 V supply UILC | |
| Supply voltage | 24 V DC -15 % / +20 % (in accordance with EN 61131-2) |
| Current draw | 20 mA |
| Potentials: 7.5 V communications power UL (potential jumper) | |
| Supply voltage | 7.5 V DC ±5 % |
| Power supply | max. 0.8 A DC (observe derating) |
| Potentials: 24 V analog supply UANA (potential jumper) | |
| Supply voltage | 24 V DC -15 % / +20 % |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Power supply | 0.5 A DC (observe derating) |
| Potentials: 24 V main supply UM | |
| Supply voltage | 24 V DC -15 % / +20 % (in accordance with EN 61131-2) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Power supply | max. 8 A DC (sum of UM + US) |
| Potentials: 24 V segment supply US | |
| Supply voltage | 24 V DC -15 % / +20 % (in accordance with EN 61131) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Power supply | max. 8 A (sum of UM + US) |
| Supply: Module electronics | |
| Current consumption | 20 mA |
| Connection technology | |
| Connection name | Inline connector |
| Inline connector | |
| Connection method | Spring-cage connection |
| Conductor cross-section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 28 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 10 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Mechanical test | |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 30g, 11 ms period, half-sine shock pulse |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 10g |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| UL, USA/Canada | |
| Identification | cULus |
| Certificate | E238705 |
| Mounting type | DIN rail mounting |
| Possible mounting positions | Right alignment |
LR
Approval ID: LR2480202TA-02RINA
Approval ID: ELE008423XG001ABS
Approval ID: 20-1968571-PDABSH
Approval ID: 840cULus Listed
Approval ID: E238705cULus Listed
Approval ID: E366272
Your advantages
Automatic detection of the transmission speed in INTERBUS (500 kbps or 2 Mbps)
Up to 63 INTERBUS local bus devices can be connected
Diagnostic and status indicators
Inline I/O adapter terminal specifically developed for all PLCnext Control devices of the Axiocontrol series
A variety of functional I/Os creates options for flexible automation solutions
Convert existing machines and systems to the new, open PLCnext Technology ecosystem