TC-XC96-AI32-2EX-PS-HIMAX01 - Module carrier

2908747

Termination Carrier for connecting 16 two-channel MACX Analog Ex i signal conditioners to analog input cards of the HIMA HIMax controller, via one C96 connector, 96-pos. Suitable for the HIMax X-AI 32 01 card, with HART multiplexer connection

This product needs further products for operation. Mandatory accessories

Product details

Set consists of

Order information:	2318457 VIP-CAB-FLK14-0,14/... : < 3 m
Notes on operation	For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Module carrier
Insulation characteristics: Air clearances and creepage distances
Insulation	Basic insulation
Overvoltage category	II
Pollution degree	2

Max. permissible current	1 A (Signal/channel)
Nominal voltage U_N	< 50 V DC (Per signal/channel)
Air clearances and creepage distances
Rated insulation voltage	30 V
Rated surge voltage	0.5 kV
Supported controller HIMA HIMax
Suitable I/O card	X-AI 32 01
Supply
Designation	Device supply
Fuse	2x 2.5 A Slow-blow (exchangeable)
Input voltage	24 V DC
Input voltage range	19.2 V DC ... 30 V DC
Input current	≤ 2 A
Redundant supply	yes, decoupled from diodes
Polarization and surge protection	Yes
Output name	Switching output
Contact switching type	1 N/C contact (alarm = open)
Maximum switching voltage	30 V DC (2 A)

Power supply
Connection method	Screw connection
Stripping length	7 mm
Number of connections	1
Number of positions	6
Conductor cross section rigid	0.75 mm² ... 2.5 mm²
Conductor cross section flexible	0.75 mm² ... 2.5 mm²
Conductor cross section AWG	18 ... 14
Controller level
Connection in acc. with standard	IEC 60603-2
Connection method	Pin strip
Type	C
Number of connections	1
Number of positions	96
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	14

Status display	2x green LEDs (PWR1 and PWR2)

Width	242 mm
Height	170 mm
Depth	159.5 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Shock	15g, according to IEC 60068-2-27
Vibration (operation)	2g, according to IEC 60068-2-6

ATEX
Identification	 II 3 G Ex ec IIC T4 Gc X
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	PxCIF21UKEX2908746X
UL, USA/Canada
Identification	UL 61010 Listed
	Class I, Div. 2, Groups A, B, C, D T4
	Class I, Zone 2, Group IIC

Air clearances and creepage distances
Standards/regulations	EN 60664-1
Directive 2014/35/EU (EMV)
Standards/regulations	EN 6100-6-2
	EN 6100-6-4
Directive 2014/34/EU (ATEX)
Standards/regulations	EN 60079-0
	EN 60079-7
	EN 60079-11

Mounting type	DIN rail mounting
Assembly note	No end clamp
Mounting position	vertical, horizontal

Commercial data

Item number	2908747
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Product key	DK271D
GTIN	4055626328201
Weight per piece (including packing)	22.22 g
Weight per piece (excluding packing)	22.22 g
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Compatible products

Mandatory accessories

Accessories

Your advantages

Mechanically decoupled, passive PCB

Robust aluminum profile with integrated DIN rail

Side parts with integrated end clamps

Interface for connection to HART multiplexer via IDC/FLK male strip

Simple or redundant supply, decoupled from diode, protected against polarity reversal

The feed-in/fault signaling module is supplied as standard and does not have to be ordered separately

Cable sets for signal connection are supplied as standard and do not have to be ordered separately

PHOENIX CONTACT S.A de C.V.

Lago Alberto No. 319 - Piso 9, Colonia Granada, Alcaldía Miguel Hidalgo, México, Ciudad de México, C.P. 11520

Ask a question +52/55/1101-1380 ventas@phoenixcontact.com.mx

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Hexahydromethylphthalic anhydride (CAS: n/a)
REACH candidate substance (CAS No.)		Lead (CAS: 7439-92-1)
SCIP	21a92128-4ba8-410a-b887-aa522471191f

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TC-XC96-AI32-2EX-PS-HIMAX01 - Module carrier

2908747

Product details

ECLASS

ETIM

UNSPSC

UL Listed

cUL Listed

cUL Listed

UL Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TC-XC96-AI32-2EX-PS-HIMAX01 - Module carrier 2908747

Product details

TC-MACX-MCR-PTB - Power and error message module 2904673

TC-C-PTB3-SC-SET1 - Cable set 2905216

TC-C-MAX2-SC-31322122 - Cable set 2904674

ME 17,5 TBUS 1,5/ 5-ST-3,81 GY - DIN rail bus connector 1090049

ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail bus connector 2695439

ECLASS

ETIM

UNSPSC

Compatible products

MACX MCR-EX-SL-RPSS-2I-2I - Repeater power supply 2865382

MACX MCR-EX-SL-RPSS-2I-2I-SP - Repeater power supply 2924676

MACX MCR-SL-RPSS-2I-2I - Repeater power supply 2904089

MACX MCR-SL-RPSS-2I-2I-SP - Repeater power supply 2904090

MACX MCR-EX-DUMMY-ISOLATOR - Dummy 2904970

MACX MCR-EX-DUMMY-ISOLATOR-SP - Dummy 2905846

EMLF (108XE)R - Label, highly flexible 0800549

ZBF 15:UNBEDRUCKT - Zack Marker strip, flat 0811202

MACX MCR-S-MUX - HART multiplexer 2865599

FLK EZ-DR.../.../... - Cable 2295059

Your advantages

TC-XC96-AI32-2EX-PS-HIMAX01 - Module carrier

2908747