DC charging cable with vehicle charging connector and free cable end for fast charging of electric vehicles (EV) with direct current (DC) via CCS type 2 vehicle charging inlets, for installation at charging stations for e-mobility (EVSE)
    
  
  CHARX ST2C-DC150-5,5MCS00P
   - 
  DC charging cable
    
      1826087
      
      
    
  
      CHARX connect standard, CCS type 2, DC charging cable, 150 A permanent, 1000 V DC, with vehicle charging connector and open cable end, cable: 5.5 m, black, straight, supports four-wire measurement technology, with analog temperature sensors, with replaceable mating face frame, with replaceable DC power contacts, with connected PP contact, PHOENIX CONTACT logo, IEC 62196-3, for charging electric vehicles (EV) with direct current (DC), IP67 degree of protection
Product details
| General | IP67 degree of protection | 
| Product type | DC charging cable | 
| Product family | CHARX connect standard | 
| Technology | Combined Charging System | 
| Application | for charging electric vehicles (EV) with direct current (DC) | 
| for installation at charging stations for electromobility (EVSE) | |
| Design | supports four-wire measurement technology | 
| with analog temperature sensors | |
| with replaceable mating face frame | |
| with replaceable DC power contacts | |
| with connected PP contact | |
| Charging standard | CCS type 2 | 
| Charging mode | Mode 4 | 
| Affixed logo | PHOENIX CONTACT logo | 
| Temperature monitoring | 2x Pt 1000 | 
| Charging power and current (DC charging) | |
| Type of charging current | DC | 
| Charging current | 150 A DC | 
| Charging power | 150 kW | 
| Rated voltage | 1000 V | 
| Charging power and current (DC charging in Boost Mode) | |
| Type of charging current | DC Boost Mode | 
| Pin assignment (Leistungskontakte) | |
| Note on the connection method | Crimp connection, cannot be disconnected | 
| Number | 3 (PE, DC+, DC-) | 
| Rated voltage | 1000 V DC | 
| Rated current | 150 A (up to 40 °C) | 
| Pin assignment (Signalkontakte) | |
| Note on the connection method | Crimp connection, cannot be disconnected | 
| Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 | 
| Number | 2 (CP, PP) | 
| Rated voltage | 30 V AC | 
| Rated current | 2 A | 
| Coding | 1500 Ω (between PE and PP) | 
| PP signal contact connected to cable | |
| Temperature sensors (Pt 1000) | |
| Sensor type | Pt 1000 | 
| Standards/regulations | DIN EN 60751 | 
| Attachment point | 2 sensors for the DC contacts | 
| Switch-off temperature | 90 °C | 
| Vehicle charging connector | |
| Width | 72 mm | 
| Height | 181.1 mm | 
| Depth | 285.3 mm | 
| Color (Housing) | black (9005) | 
| Color (Handle area) | black (9005) | 
| Color (Mating face) | black (9005) | 
| Color (Cable) | black (9005) | 
| Material (Vehicle charging connector) | Plastic | 
| Material (Cable outer sheath) | TPE-U | 
| Material (Contact surface) | Silver | 
| Note | The color appearance and gloss level of the charging cable may vary. | 
| Flammability rating according to UL 94 | V0 (Mating face) | 
| Cable length | 5.5 m ±50 mm | 
| Wiring standards/regulations | DIN EN 50620 | 
| Wiring certifications | VDE-Reg. | 
| Cable type | Class 6 | 
| Cable type | straight | 
| Cable structure | 2 x 35 mm² + 1 x 16 mm² + 2 x 0.75 mm² + 6 x 0.5 mm² | 
| External cable diameter | 26.10 mm ±0.5 mm | 
| Outer sheath, material | TPE-U | 
| Stripping length of the sheath | 180 mm ±10 mm | 
| Stripping length | 180 mm ±10 mm | 
| Cable resistance | 0.000272 Ω/m | 
| Bending radius | 261 mm ±1 mm (10 x D) | 
| Mechanical data | |
| Insertion/withdrawal cycles | > 10000 | 
| Insertion force | < 100 N | 
| Withdrawal force | < 100 N | 
| Ambient conditions | |
| Degree of protection (Vehicle charging connector) | IP67 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) | 
| Ambient temperature (operation) | -30 °C ... 40 °C | 
| max. 55 °C (Current reduction required, observe the DC contact temperature limit value of 90°C) | |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C | 
| Altitude | max. 5000 m (above sea level) | 
| Standards | |
| Standards/regulations | IEC 62196-3 | 
| Item number | 1826087 | 
| Packing unit | 1 pc | 
| Minimum order quantity | 1 pc | 
| Product key | XWBAAD | 
| GTIN | 4067923460874 | 
| Weight per piece (including packing) | 8,974 g | 
| Weight per piece (excluding packing) | 7,974 g | 
| Country of origin | CN | 
ECLASS
| ECLASS-15.0 | 27144705 | 
| EU RoHS | |
| Fulfills EU RoHS substance requirements | Yes (No exemptions) | 
| China RoHS | |
| Environment friendly use period (EFUP) | EFUP-E No hazardous substances above the limits | 
| EU REACH SVHC | |
| REACH candidate substance (CAS No.) | No substance above 0.1 wt% | 
Compatible products
- 
    
      
- 
    
      EV-T2CCS-MF-M4X45-BIT - Repair kit 1085796
- 
    
      EV-T2CCS-MF-M4X45 - Repair kit 1081734
- 
    
      EV-LABEL-K - Label 1309761
- 
    
      EV-LABEL-L - Label 1309765
- 
    
      G-INS-M40-L68N-PNES-BK - Cable gland 1424484
- 
    
      CHARX PS/3AC/920DC/87.5KW - DC power module 1162690
- 
    
      CHARX PS-M2/3AC/1000DC/30KW - DC power module 1232243
- 
    
      CHARX PS-M2/825DC/1000DC/30KW - DC power module 1296467
- 
    
      TW 50/ 1-CL - Panel feed-through terminal block 1708744
- 
    
      XPC 1,5/ 8-ST-3,5 BK - PCB connector 1464111
- 
    
      ES-BPC-C 35 BK - Connector 1176270
- 
    
      ES-BPC-C 35 OG - Connector 1176276
- 
    
      SPTD 1,5/ 8-H-3,5 - PCB terminal block 1841555
PHOENIX CONTACT S.A de C.V.
        
        Lago Alberto No. 319 - Piso 9, Colonia Granada, Alcaldía Miguel Hidalgo, México, Ciudad de México, C.P. 11520