SACC-CC-8QO-0,5 SH
-
Conductor connector
1414612
Cable connector, 8-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
Product details
| Assembly note | NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Assembly note | If the conductor is to be reconnected, it must be cut off above the last contact point. |
| Product type | Cable connector |
| Sensor type | Universal |
| Number of positions | 8 |
| No. of cable outlets | 2 |
| Shielded | yes |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Dimensional drawing |
|
| Length | 83 mm |
| Wrench size, union nut | 15 mm |
| Wrench size, counter nut | 17 mm |
| External dimensions | |
| Outside diameter | 5 mm ... 9.7 mm |
| Connection technology | |
| Connection method | Insulation displacement connection |
| Frequency of connections between conductors of the same cross section | 10 |
| Conductor connection | |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter | Class 2-6 |
| Tightening torque | 5 Nm (Pressure nut) |
| Wrench size, union nut | 15 mm |
| Wrench size, contact carrier | 17 mm |
| Wire diameter including insulation | 0.75 mm ... 2 mm |
| Tightening torque | 5 Nm (Pressure nut) |
| Pin assignment | |
| Contact | Color (signal designation) | Contact (optional) | 1 = WH |
| 2 = BN | |
| 3 = GN | |
| 4 = YE | |
| 5 = GY | |
| 6 = PK | |
| 7 = BU | |
| 8 = RD | |
| Rated surge voltage | 0.8 kV |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 30 V AC |
| 30 V DC | |
| Nominal current IN | 2 A |
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Material of grip body | Zinc die-cast, nickel-plated |
| Contact material | CuSn |
| Contact surface material | Ni/Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Standards/regulations | PA 6.6 |
| Wire insulation material | PVC / PE / PP / rubber |
| Connection 1 | |
| Head design | Cable connectors |
| Signal type/category | Universal |
| Ambient conditions | |
| Degree of protection | IP65 |
| IP67 | |
| Ambient temperature (operation) (male connector/female connector) | -40 °C ... 85 °C |
| Ambient temperature (assembly) | -5 °C ... 50 °C |
| Testing | |
| Standards/regulations | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Standards/specifications | according to IEC 61076-2-101 |
| Standard designation | Shock, vibration |
| Standards/specifications | EN 50155:2001 |
Your advantages
Innovative and time saving - QUICKON fast connection for time saving of up to 80 % for on-site connection
Safe use in the field, thanks to a high degree of protection
Reliable signal transmission – 360° shielding in environments with electromagnetic interference
Insulation displacement connection: innovative and time-saving assembly without stripping the single wire