Use the feed-through terminal blocks and multi-level terminal blocks from Phoenix Contact for the space-saving connection of two or more conductors. The terminal blocks are characterized by their flexible bridgeability and optimum marking options. Together with the component terminal blocks, terminal blocks with LEDs, blocking diodes or resistors are also available.
More informationFeed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
Double-level terminal block, nom. voltage: 500 V, nominal current: 22 A, connection method: Push-in connection, 1st and 2nd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 24 A, connection method: Screw connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.14 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
Feed-through terminal block, nom. voltage: 800 V, nominal current: 41 A, connection method: Screw connection, Rated cross section: 6 mm2, cross section: 0.2 mm2 - 10 mm2, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
Ground modular terminal block, number of connections: 2, connection method: Screw connection, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: green-yellow
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Screw connection, Rated cross section: 6 mm2, cross section: 0.2 mm2 - 10 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
Push-X technology sets new benchmarks in connection technology: Using the new technology, you can now connect all types of conductors and cross-sections even faster. The easy and tool-free operation reduces installation times and paves the way for automated wiring.
Feed-through terminal block, multi-conductor connection
Feed-through terminal blocks are characterized by two terminal points and a compact design. The large cross-section range of the feed-through terminal blocks allows universal use in every application. Along with the standard feed-through terminal blocks for wiring with, say, copper wires, Phoenix Contact also provides Al/Cu terminal blocks. The universal terminal blocks enable the connection of aluminum and copper conductors in just one terminal block.
Multi-conductor terminal block, double connection
Even more compact wiring is possible with the multi-conductor terminal blocks from Phoenix Contact. Multi-conductor terminal blocks are feed-through terminal blocks with three or four connections that are all routed via the same current bar. This allows you to connect up to four conductors with individual wiring per terminal block. The design of the terminal blocks means that fewer terminal blocks and supply lines are required for wiring. Along with an improved overview, this also enables wiring or potential distribution in tight spaces.
Multi-level terminal blocks and double-level terminal blocks
The multi-level terminal blocks allow even higher wiring density compared to the multi-conductor terminal blocks. Multi-level terminal blocks are available with up to three levels. A single potential is routed through each level, meaning that each level acts as a feed-through terminal block. Moreover, each level has its own function shaft. The function shafts of most double-level terminal blocks are designed so that the two levels can be connected to each other via vertical bridging. This creates a multi-conductor terminal block on several levels. The CLIPLINE complete system includes special wire bridges for establishing this bridging. Along with simple versions, multi-level terminal blocks are also available with a PE connection. The PE connection level does not have a function shaft. The discharge potential leads directly to the busbar via the metallic PE foot.
Component terminal block
You can use component terminal blocks in various applications. Safety requirements are also taken into account: Printed circuit diagrams and symbols reduce the risk of faulty wiring considerably. The various electromechanical components and electrical components of the terminal blocks have different uses. They are necessary for the following applications:
Efficient planning with PROJECT complete
Intuitive configuration, intelligent functions, and a customizable user interface: PROJECT complete planning and marking software is the innovative solution for the easy planning of your terminal strips and the straightforward creation of the corresponding markings.
From the transfer of data from electrical planning to delivery of your finished product, the software features individual and convenient process support.