VIP VARIOFACE front adapter, with assembled shielded round cable for ControlLogix® 1756 I/O, 1 x 20 single wires can be connected, cable length: 2 m
Our controller-specific system cabling was specially developed to allow quick, error-free connection to the I/O modules of a wide range of controllers. With the simple plug-in front adapters, system cables, and termination boards, especially the new VARIOFACE Front Connect generation, you can make time savings of up to 90% and space savings of up to 60% in comparison with conventional solutions. VARIOFACE system cabling is available for all common I/O systems.More information
The new generation of ultra-compact termination boards is the perfect addition between the remote I/O system and the field level. An innovative design ensures fast and fault-free wiring as well as space savings in the control cabinet. VARIOFACE Front Connect ideally supports decentral peripheral devices with a high degree of flexibility and a slim design.
The universal front adapters for Allen Bradley ControlLogix® are available for 20- and 36-pos. I/O cards. Due to the open cable ends, any termination board can be connected.
The VARIOFACE controller-specific system cabling consists of the following components:
1. Front adapters:
The front adapter patches the signals so that complex wiring with single wires is not necessary. Simply plug the adapter into the correct input/output card of the controller. Solutions are available for the following controller manufacturers: ABB, Allen Bradley, Emerson, Honeywell, GE Fanuc, Phoenix Contact, Mitsubishi Electric, OMRON, Schneider Electric, Siemens, Yokogawa
2. System cables:
The signals are transmitted from the controller to the module via a pre-assembled system cable. Different versions are available depending on length, number of positions, and shielding.
3. Termination boards:
The termination board transmits the control and field signals. You also benefit from our varied product range in this case. Termination boards are available in a wide range of connection technologies, overall widths, and different functions.
The new generation of ultra-compact termination boards is the perfect addition between the remote I/O system and the field level.An innovative design ensures fast and error-free wiring as well as space savings in the control cabinet.VARIOFACE Front Connect ideally supports decentral peripheral devices with high flexibility and a narrow design.
Wiring the I/O devices with single-core wires is very time-consuming and prone to errors.
The VARIOFACE system cabling is a harmonized cabling concept consisting of the components front adapter, system cable, and termination board.
Use the VIP power cabling universal front adapters to couple all signal types to your SIMATIC® S7-300 controller modules via Plug and Play. The adapter versions with COMBI connector or free cable end are suitable for signal and power wiring. Implement applications with different switching requirements safely and flexibly.
The connection to the CLIPLINE complete terminal block range on the field side means that you can also benefit from the full scope of functions of the terminal block.
The system cabling adapter enables fast and error-free connection of relay modules to the control level. This solution combines the product features of PLC-INTERFACE and VARIOFACE system cabling. The input and output block allows a channel-specific assembly depending on the switching requirements with the modular structure.