Monitoring relay - EMD-SL-PH-400

Monitoring relay for monitoring phase sequence, phase failure and asymmetry, 342…457 V AC, supply from the measurement voltage, 2 changeover contacts

Product Details

Increasingly higher demands are being placed on safety and system availability - across all sectors. Processes are becoming more and more complex, not only in mechanical engineering and the chemical industry, but also in plant and automation technology. Demands on power engineering are also increasing constantly.
Error-free and therefore cost-effective operation can only be achieved through continuous monitoring of important network and system parameters. Electronic monitoring relays in the EMD series are available for a wide range of monitoring tasks to avoid the consequences of errors or to keep them within limits.
The operating states are indicated using colored LEDs, errors that may occur can be sent to a control system via a floating contact or can shut down a part of the system. Some device versions are equipped with startup and response delays in order to briefly tolerate measured values outside the set monitoring range.

Product type Phase monitoring relay
Operating mode 100% operating factor
Mechanical service life approx. 2x 107 cycles
Insulation characteristics
Overvoltage category III
Pollution degree 2
Insulation Basic insulation

Service life electrical 2x 105 cycles at ohmic load, 1000 VA
Maximum power dissipation for nominal condition 1 W
Mains type 3-phase (sinus)
Rated insulation voltage 300 V
Rated surge voltage 4 kV
Supply voltage From the measured voltage
Nominal power consumption 9 VA

Input name Measuring input
Measured value AC sine (48 Hz ... 63 Hz)
Nominal input voltage UN 400 V (3 N ~ 400/230 V)
Maximum input voltage 3 N ~ 457/264 V
Input resistance of voltage input 15 kΩ
Frequency range 48 Hz ... 63 Hz
Setting range for response delay ≤ 350 ms (fixed setting)
Setting range for starting delay ≤ 500 ms (fixed setting)
Min setting range of the voltage threshold value 342 V AC
Max. setting range of the voltage threshold value 457 V AC
Function Phase sequence
Phase failure
Asymmetry Fixed, approx. 30 %
Recovery time < 100 ms

Contact type 2 floating changeover contacts
Maximum switching voltage 250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max. 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse 5 A (fast-blow)

Connection method Screw connection
Stripping length 8 mm
Conductor cross section solid 0.5 mm² ... 2.5 mm²
Conductor cross section flexible 0.25 mm² ... 2.5 mm²
Conductor cross section AWG 20 ... 14

Width 22.5 mm
Height 90 mm
Depth 113 mm

Housing insulation material Polyamide PA, self-extinguishing

Ambient conditions
Degree of protection IP40 (Housing)
IP20 (Connection terminal blocks)
Ambient temperature (operation) -25 °C ... 55 °C
-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport) -25 °C ... 70 °C
Climatic class 3K3 (in acc. with EN 60721)
Permissible humidity (operation) 15 % ... 85 %

Designation CE
Certificate CE-compliant
Designation UL, USA / Canada
Identification UL/C-UL Listed UL 508

Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2

Standards/regulations EN 50178

Mounting type DIN rail mounting
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Mounting position any

Item number 2866077
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key CK
Product Key CK4111
Catalog Page Page 253 (C-5-2019)
GTIN 4017918952679
Weight per Piece (including packing) 152.5 g
Weight per Piece (excluding packing) 149 g
Customs tariff number 85364900
Country of origin AT


ECLASS-9.0 27371803
ECLASS-10.0.1 27371803
ECLASS-11.0 27371803


ETIM 8.0 EC001441


UNSPSC 21.0 39121100


Approval ID: TR_TS_D_00573_c


Approval ID: RU*C-DE.*08.B.00010

UL Listed

Approval ID: FILE E 172140

cUL Listed

Approval ID: FILE E 172140

cULus Listed

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Your advantages

Variable supply voltage range