Sleeve receiver for 1.5 mm2 sleeves
Strip and crimp conductors in just one step with our stripping and crimping devices. With the mobile stripping and crimping devices, it takes just two seconds to assemble your conductors. The CF 3000-2,5 stripping and crimping device processes taped ferrules with insulating collars in accordance with DIN 46228-4.More information
Sleeve receiver for 1.5 mm2 sleeves
Sleeve receiver for 2.5 mm2 sleeves
Sleeve receiver for 0.75 mm2 sleeves
Replacement cable guide 0,75 mm2, for sleeve feed CF 3000 HZG 0,75
Sleeve receiver for 1.0 mm2 sleeves
Replacement knife for the automatic stripping and crimping device CF 3000-2,5
Stripping and crimping device, 230 V version, for taped insulated ferrules 0.25 ... 2.5 mm2, sleeve length 8 mm, incl. conversion kits 0.5 ... 2.5 mm2
Cutting unit, for CF CRIMPHANDY, for stranded copper wires from 0.5 mm2 ... 1.5 mm2, incl. receptacle tray
Replacement battery for CRIMPHANDY..., Li-ion 7.4 V, 0.68 Ah
Replacement processing insert 0.75 mm2, for the crimping device CF 3000-2,5
Classic conductor preparation involves two steps, two tools, and a lot of time. The portable stripping and crimping device from Phoenix Contact revolutionizes this process: just one tool, one work step, and time savings of around 75%.
The portable stripping and crimping device is a handheld device for stripping conductors and crimping ferrules in one step that takes less than two seconds. Automatic monitoring functions ensure high-quality crimping every time.
The automated stripping and crimping function makes operating the device easier: insert an unprocessed conductor, strip and crimp it automatically – and you’re done!
The portable stripping and crimping device continually indicates its operating state via color LEDs. There are only operating elements for switching the device on/off and resetting it.
The portable stripping and crimping device is equipped with capacitive sensor technology for detecting the cross-section of inserted conductors. The device automatically detects if a conductor does not fit, reliably preventing faulty crimping. The error is indicated via an LED.
This guarantees high-quality crimping results. The device’s square crimping function can be used for all terminal points and terminal shafts. The pull-out forces exceed the specified standard conditions.
Work in or around the control cabinet does not need to be hindered by cables or hoses. The portable stripping and crimping device has a powerful, easy-to-replace lithium-ion polymer battery for up to 2000 crimping operations.
This means that the portable handheld device is ready to use for several days. The fast charger provided with the device charges the battery to full capacity in just one hour.
The portable stripping and crimping device has an integrated magazine for ferrules in strip form. The automatic feed allows multiple conductors to be crimped one after another without interruption.
The portable stripping and crimping device has a lightweight, removable collecting chamber for waste insulation. This guarantees a clean working environment. It allows the device to be used inside a control cabinet.
The CRIMPHANDY CUTTER lets you cut conductors to the right length correctly and easily. The practical cutter is quick and easy to install.
For mobile applications, use the CF 3000 compact stripping and crimping device. With this device, you can quickly and safely process bulk ferrules in tape format.
The conductor is stripped and then crimped with a ferrule in just one step.
The automatic device can be adapted to various cross-sections in less than a minute.
For bulk processing, use the sturdy and robust CF 1000 stripping and crimping device.
The conductor is stripped and then crimped with a ferrule in just one step. You can process up to 1,200 conductors per hour with this automatic device.