Managed Switch 2000, 8 M12 ports 10/100/1000 Mbps, degree of protection: IP65/IP66/IP67, PROFINET Conformance-Class B
DownloadsWidth | 60 mm |
Height | 226 mm |
Depth | 46 mm |
General | Support by phone or on-site (fee is charged) |
Housing material | Zinc die-cast |
Mounting type | Wall mounting |
Ethernet | |
Connection method | M12 connectors, X-coded |
Note on the connection method | Auto negotiation and autocrossing |
Transmission speed | 10/100/1000 Mbps |
Transmission physics | Copper |
Transmission length | 100 m (per segment) |
Signal LEDs | Data receive, link status |
No. of channels | 8 (M12 ports) |
Type | Stand-alone |
Product type | Switch |
MTTF | 461.15 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
149.69 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
19.78 Years (SN 29500 standard, temperature 70°C, operating cycle 100%) | |
Signal delay | ≥ 1.9 µs (Store-and-Forward mode, 10/100/1000 Mbps, depending on the frame size) |
Insulation characteristics | |
Protection class | III (VDE 0106) |
Switch functions | |
Diagnostic functions | RMON History |
LLDP (Link Layer Discovery Protocol) | |
SNMP-Traps | |
N:1-Portmirroring | |
ACD (Address Conflict Detection) | |
SysLog | |
CRC-Surveillance | |
Basic functions | Store-and-forward switch, complies with IEEE 802.3 |
PROFINET conformance class | Conformance-Class B |
PROFINET device function | PROFINET device |
Fast Startup | |
Filter functions | Quality of Service (8 priority classes) |
Class of Service | |
DiffServ/DSCP | |
Port-Priorisierung | |
VLAN (up to 32 VLANs) | |
IGMP Snooping/Querier (v1/v2) | |
Auto-Query-Port | |
Extended Multicast Filtering | |
IP parameterization | DHCP-Client |
DHCP Option 82 (Relay Agent) | |
DHCP server (pool-based, port-based) | |
BootP | |
DCP (Discovery and Configuration Protocol) | |
MAC address table | 8k |
Management | Web-based management (HTTP/HTTPS) |
Role-based user management (LDAP, RADIUS) | |
SNMPv1/v2/v3 | |
Command-line interface (Telnet, SSH) | |
Redundancy | MRP (Media Redundancy Protocol) |
RSTP (Rapid Spanning Tree Protocol) | |
FRD (Fast Ring Detection) | |
Large Tree Support | |
LACP (Link Aggregation Control Protocol) | |
PROFINET S2 system redundancy | |
Status and diagnostic indicators | LEDs: US1, US2 (power supply), Fail, 2 LEDs per Ethernet port (Link/Activity and Speed) |
Additional functions | Jumbo frames (max. 9,600 bytes) |
Transmission of MMS and GOOSE (IEC 61850-8-1) | |
Transmission of Modbus TCP | |
Time synchronization | SNTP (Simple Network Time Protocol) |
Security functions | |
Port security | MAC-based, RADIUS (IEEE 802.1X), MAC Authentication Bypass |
Basic functions | Store-and-forward switch, complies with IEEE 802.3 |
Local diagnostics | US1/2 Supply voltage US1, US2 Green LED |
FAIL Div. LED red | |
LINK Link status Green LED | |
Maximum power dissipation for nominal condition | 6.93 W (US = min, Tamb = max) |
Test section | for one minute 500 V DC |
Transmission medium | Copper |
Supply | |
Supply voltage | 24 V DC (redundant) |
Supply voltage range | 9 V DC ... 57 V DC |
Residual ripple | 3.6 VPP (within the permitted voltage range) |
Max. current consumption | 0.77 A (US = min, Tamb = max) |
Typical current consumption | 260 mA (at US = 24 V DC and 25 °C ambient temperature) |
Current consumption | 260 mA |
Connection method | M12 connector (A-coded) |
Degree of protection | IP65 |
IP66 | |
IP67 | |
Ambient temperature (operation) | -40 °C ... 70 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % |
Permissible humidity (storage/transport) | 5 % ... 95 % |
Shock (operation) | 30g (EN 60068-2-27) |
Vibration (operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
Air pressure (operation) | 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) |
Air pressure (storage/transport) | 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) |
Free from substances that could impair the application of coating | Yes |
Conformance with EMC directives | EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B |
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A | |
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A | |
EN 61000-6-2 EN 61000-4-5 (surge) Criterion B | |
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A | |
EN 61000-6-3 (conducted emissions) Class B | |
EN 61000-6-3 (conducted emissions) Class B | |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 61000-6-3 |
Noise immunity | EN 61000-6-2 |
Status display | LEDs: US1, US2 (power supply), Fail, 2 LEDs per Ethernet port (Link/Activity and Speed) |
Item number | 1106615 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Sales Key | DNN126 |
Product Key | DNN126 |
GTIN | 4063151001674 |
Weight per Piece (including packing) | 1,651.4 g |
Weight per Piece (excluding packing) | 1,400 g |
Customs tariff number | 85176200 |
Country of origin | DE |
ECLASS-9.0 | 19170106 |
ECLASS-10.0.1 | 19170401 |
ECLASS-11.0 | 19170401 |
ETIM 8.0 | EC000734 |
UNSPSC 21.0 |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” |