Power module - CAPAROC PM S-R
1115661

Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. For DIN rail installation via the CAPAROC current rails.

This product needs further products for operation. Mandatory Accessories

Product Details




General
Note LABS release – in accordance with test specification VW PV 3.10.7:2005-0
When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules.

Product type Device circuit breakers
Insulation characteristics
Protection class III
Pollution degree 2

Operating voltage 10 V DC ... 30 V DC
Rated voltage 12 V DC
24 V DC
Rated current IN 45 A DC (Total current input)
Rated surge voltage 0.5 kV
Tripping method E (electronic)
Dielectric strength 35 V DC (Load circuit)
Efficiency > 99 %
Closed circuit current I0 typ. 9 mA (no load at 24 V)
Power dissipation typ. 0.22 W (no load at 24 V)
< 1.5 W (in nominal operation at 24 V and 45 A)
Temperature derating 45 A (Total current at 40°C)
30 A (Total current at 65 °C)
MTBF (IEC 61709, SN 29500) 18886912.65 h (at 25 °C with 21 % load)
5907048.64 h (at 40°C with 34.25% load)
933563.97 h (at 40°C with 100% load)
Voltage drop 0.03 V (at 45 A)
Reset
Input voltage range 7 V DC ... 30 V DC (Reset with falling edge)
Current consumption typ. 0.5 mA (at 24 V DC)
Pulse length ≥ 50 ms
Stripping length 8 mm
Conductor cross section solid 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.2 mm² ... 1.5 mm²
Status output
Output voltage max. 30 V DC (Input voltage ±5% in the event of no error)
0 V DC (Error)
Output current max. 20 mA
Stripping length 8 mm
Conductor cross section solid 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.2 mm² ... 1.5 mm²
Status output
Output voltage max. 30 V DC (Input voltage ±5% when I >80% at at least one channel)
Output current max. 20 mA
Stripping length 8 mm
Conductor cross section solid 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.2 mm² ... 1.5 mm²

Main circuit IN+
Connection method Push-in connection
Stripping length 18 mm
Conductor cross section solid 0.5 mm² ... 16 mm²
Conductor cross section AWG 20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.5 mm² ... 16 mm²
Main circuit IN-
Connection method Push-in connection
Stripping length 18 mm
Conductor cross section solid 0.5 mm² ... 16 mm²
Conductor cross section AWG 20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.5 mm² ... 16 mm²

PROFINET
Maximum system extension ≤ 20 (Modules)

Power (PWR) LED green lit (with no channel errors)
lit (Supply voltage in the nominal range)
flashing (3 x on deactivation of programming lock)
Power (PWR) LED red lit (Supply voltage outside the nominal range)

Dimensional drawing
Width 12.4 mm
Height 132.4 mm
Depth 111.3 mm (incl. DIN rail 7.5 mm)

Color light grey RAL 7035
Material PA 6 (Housing)
PA 6 (Pusher)
PA 6 (Release lever)
PC (Fiber optics)
Flammability rating according to UL 94 V-0

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -30 °C ... 65 °C
Ambient temperature (storage/transport) -40 °C ... 70 °C
Altitude ≤ 4000 m (amsl (above mean sea level))
Humidity test 96 h, 95 % RH, 40 °C
Shock (operation) 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27)
25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock)
Vibration (operation) 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z)

UL approval
Identification UL/C-UL Listed UL 508

Standards/specifications EN 61000-6-2
Standards/specifications EN 61000-6-3
Standards/specifications EN 60068-2-78
Standards/specifications EN 50178
Standards/specifications EN 60068-2-6
Standards/specifications EN 60068-2-27

Mounting type pluggable onto CAPAROC CR… current rail

Item number 1115661
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key CLA231
Product Key CLA231
GTIN 4063151040635
Weight per Piece (including packing) 127.6 g
Weight per Piece (excluding packing) 91.9 g
Customs tariff number 85363030
Country of origin DE


ECLASS

ECLASS-9.0 27141116
ECLASS-10.0.1 27140401
ECLASS-11.0 27140401

ETIM

ETIM 8.0 EC003538

UNSPSC

UNSPSC 21.0 39121400

UL Listed

Approval ID: FILE E 123528

cUL Listed

Approval ID: FILE E 123528

cULus Listed


REACh SVHC Lead 7439-92-1

Compatible Products




Your advantages

The benchmark that you can customize by selecting single signals and resets all the way to PROFINET communication
Particularly easy operation for everyone with tool-free assembly, direct feed-in to the busbar, and clear operating states
Exceptionally easy design-in thanks to the comprehensive digital data packet and PROFINET function blocks