BS-MAGAZINE PROFILE T - Magazine mounting profile

1640730

Mounting profile for magazines without marking area.

Product details

Technical data

Dimensions

Material specifications

Color	transparent
Material	ABS

Environmental and real-life conditions

Ambient conditions
Optimum ambient temperature (storage/transport)	20.00 °C 60.00 %
Ambient temperature (operation)	5 °C ... 35 °C
Ambient temperature (storage/transport)	0 °C ... 60 °C
Permissible humidity (operation)	10 % ... 80 %
Permissible humidity (storage/transport)	20 % ... 80 %
Resistance to UV radiation	Adhesive tape, UV-resistant, protect from direct sunlight during storage.

Mounting

Assembly note	Installation note: Taking the adhesive instructions into account, the T profile can be installed in mounting positions with a tilt of up to 10°. The surface must be sufficiently firm, smooth, and able to carry the required weight, e.g., stainless steel sheeting. Maximum weight load: 7 kg/10 cm width at 10° tilt, maximum. Adhesive instructions: The surfaces and joining pieces must be dry and clean. Avoid any condensation of moisture on the surfaces to be bonded. The joining pieces must be free of dust, grease, oil, and release agents. Loose paint or top layers must be removed or solidified. Apply pressure (10 N/cm² ... 15 N/cm², approximately) using a pressure roller or surface press. The curing time of the adhesive bonding is 24 hours.

Commercial data

Item number	1640730
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	BH2
Product key	BH2XX1
GTIN	4067923167216
Weight per piece (excluding packing)	55 g
Customs tariff number	39162000
Country of origin	DE

Classifications

Environmental product compliance

PHOENIX CONTACT Middle East FZ LLC

1201N-1206N, Dubai Science Park Towers - North, P.O. Box 345002, Dubai, United Arab Emirates

EU RoHS
Fulfills EU RoHS substance requirements	Not applicable (No electrical and electronic equipment (EEE), cannot be used in EEE)
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%