AXL DO 32/1-ME - I/O module - 2688174

Material specifications

Color	gray

Interfaces

Output data

Digital:
Output name	Digital outputs
Connection method	Direct plug-in technology
Connection technology	1-conductor
Number of outputs	32
Protective circuit	Short-circuit protection, overload protection of the outputs; Electronic
Output voltage	24 V
Limitation of the voltage induced on circuit interruption	-27.8 V ... -17 V
Maximum output current per channel	500 mA
Maximum output current per module	8 A (provide external protection)
Nominal output voltage	24 V DC
Load min.	10 kΩ
Output voltage when switched off	max. 1 V
Output current when switched off	max. 300 µA
Nominal load, inductive	max. 12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, lamp	max. 12 W (at nominal voltage)
Nominal load, ohmic	max. 12 W (48 Ω, with nominal voltage)
Switching frequency	max. 5500 per second (with ohmic load)
		max. 1 per second (with inductive load)
		max. 16 per second (with nominal lamp load)
Reverse voltage resistance to short pulses	limited protection up to 0.5 A for 1 s
Behavior with overload	Shutdown with automatic restart
Behavior with inductive overload	Output can be destroyed
Signal delay	max. 150 µs (when switched on)
Signal delay		max. 200 µs (during switching off with ohmic nominal load)
Overcurrent shut-down	as of 0.7 A
Output current with ground connection interrupt when switched off	< 1 mA

Product properties

Product type	I/O component
Type	block modular
Mounting position	any (no temperature derating)
Diagnostics messages	Short-circuit or overload of the digital outputs yes

Electrical properties

Potentials
Protection	max. 8 A (polarity reversal protection up to 5 A)
Protective circuit	Surge protection of the supply voltage; electronic (35 V, 0.5 s)
Protective circuit		Polarity reversal protection of the supply voltage; parallel diode; with external 5 A fuse (only for commissioning)
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 180 mA
Potentials: Supply for digital output modules (U_O)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	8 A (provide external protection)
Electrical isolation/isolation of the voltage ranges
Test voltage: 5 V supply of the local bus (U_Bus) / 24 V supply (I/Os)	500 V AC, 50 Hz, 1 min
Test voltage: 5 V supply of the local bus (U_Bus) / functional ground	500 V AC, 50 Hz, 1 min
Test voltage: 24 V supply (I/O) / functional ground	500 V AC, 50 Hz, 1 min

Connection data

Connection technology
Connection name	Axioline F connector
Conductor connection
Connection method	Push-in connection
Conductor cross-section rigid	0.2 mm² ... 1.5 mm²
Conductor cross-section flexible	0.2 mm² ... 1.5 mm²
Conductor cross-section AWG	24 ... 16
Axioline F connector
Connection method	Push-in connection
Conductor cross-section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross-section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross-section AWG	24 ... 16

Environmental and real-life conditions

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)	5 % ... 95 % (according to DIN EN 61131-2)

Standards and regulations

Protection class	III (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Item number	2688174
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Sales key	#####
Product key	DRI232
GTIN	4046356624503
Weight per piece (including packing)	444 g
Weight per piece (excluding packing)	444 g
Customs tariff number	85389091
Country of origin	DE

AXL DO 32/1-ME - I/O module

2688174

Mounting type	DIN rail mounting
Mounting position	any (no temperature derating)

EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%