REL-IR-BL/L-110DC/2X21 - Single relay

1109550

Plug-in industrial relay in basic design with power contacts, 2 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 110 V DC

This product needs further products for operation. Mandatory accessories

Product details

Notes on operation	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
Notes on operation	The outputs are not suitable for switching different outer conductors.
Notes on operation	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.

Product type	Single relay
Operating mode	100% operating factor
Mechanical service life	3x 10⁷ cycles
Data management status
Date of last data management	18.01.2024
Article revision	00
Insulation characteristics: Air clearances and creepage distances between coil and contact side
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Service life electrical	see diagram
Maximum power dissipation for nominal condition	0.85 W
Test voltage (Winding/contact)	2.5 kV_rms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)	2.5 kV_rms (50 Hz, 1 min., changeover contact/changeover contact)
Air clearances and creepage distances between coil and contact side
Rated insulation voltage	250 V AC
Rated surge voltage	5 kV

Coil side
Nominal input voltage U_N	110 V DC
Input voltage range	88 V DC ... 187 V DC (20 °C)
Drive and function	monostable
Drive (polarity)	polarized
Typical input current at U_N	6.9 mA
Typical response time	15 ms
Typical release time	10 ms
Coil voltage	110 V DC
Status display	LED (yellow)
Coil resistance	16.1 kΩ ±12 %

Switching
Contact switching type	2 changeover contacts
Type of switch contact	Single contact
Contact material	AgNi
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	12 V (10 mA)
Limiting continuous current	12 A
Maximum inrush current	24 A (20 ms, N/O contacts)
Min. switching current	10 mA (12 V)
Interrupting rating (ohmic load) max.	288 W (24 V DC)
	130 W (48 V DC)
	90 W (60 V DC)
	66 W (110 V DC)
	88 W (220 V DC)
	3000 VA (250 V AC)
Switching capacity min.	120 mW

Connection method	Plug-in connection

Width	22.5 mm
Height	28 mm
Depth	35.5 mm

Ambient conditions
Degree of protection	RT II
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 2000 m

Air clearances and creepage distances between coil and contact side
Standards/regulations	EN 61810-1

Mounting type	Plug-in mounting
Assembly note	in rows with zero spacing
Mounting position	any

Commercial data

Item number	1109550
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	*****
Product key	CKF943
GTIN	4063151021818
Weight per piece (including packing)	29.7 g
Weight per piece (excluding packing)	28 g
Customs tariff number	85364900
Country of origin	AT

Classifications

Approvals

Environmental product compliance

Compatible products

Mandatory accessories

ECLASS-11.0	27371601
ECLASS-12.0	27371601
ECLASS-13.0	27371601

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

REL-IR-BL/L-110DC/2X21 - Single relay

1109550

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

VDE Zeichengenehmigung

cULus Recognized

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

REL-IR-BL/L-110DC/2X21 - Single relay 1109550

Product details

ECLASS

ETIM

UNSPSC

Compatible products

ECOR-2-BSC2-RT/2X21 - Relay base 2908341

ECOR-2-BSC2-RT/4X21 - Relay base 2908214

ECOR-2-BSC3/4X21 - Relay base 2907521

ECOR-2-BSC2/4X21 - Relay base 1089994

REL-IR-BL/L-110DC/2X21 - Single relay

1109550