cUL Recognized
Approval ID: E238705| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| keine | ||||
| 24 V | 1 A | |||
UL Recognized
Approval ID: E238705| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| keine | ||||
| 24 V | 1 A | |||
V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: D-SUB pin strip 1x 15-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: positive switching
| Product type | Interface module | 
| Product family | PLC-INTERFACE | 
| Number of positions | 15 | 
| No. of channels | 8 | 
| Insulation characteristics: Air clearances and creepage distances | |
| Insulation | Functional insulation | 
| Overvoltage category | II | 
| Pollution degree | 2 | 
| Operating voltage range | 18 V DC ... 33.6 V DC | 
| Current (per branch) | ≤ 1 A | 
| Current (Power supply) | ≤ 3 A | 
| Air clearances and creepage distances | |
| Rated insulation voltage | 50 V | 
| Rated surge voltage | 0.5 kV (1.2/50 μs) | 
| Supported controller universal | |
| Suitable I/O card | universal | 
| Connection 1 (control level) | |
| Connection in acc. with standard | IEC 60807-2 | 
| Connection method | D-SUB pin strip | 
| Screw thread | UNC 4-40 | 
| Number of connections | 1 | 
| Number of positions | 15 | 
| Insertion/withdrawal cycles | > 500 | 
| Pitch | 2.74 mm | 
| Connection 2 (field level) | |
| Connection method | Plug-in connection | 
| Note | Can be snapped onto 8x PLC-INTERFACE terminals | 
| Connection 3 (supply) | |
| Connection method | Screw connection | 
| Stripping length | 8 mm | 
| Screw thread | M3 | 
| Number of connections | 1 | 
| Number of positions | 2 | 
| Conductor cross-section rigid | 0.2 mm² ... 4 mm² | 
| Conductor cross-section rigid (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² | 
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² | 
| 0.25 mm² ... 2.5 mm² (Ferrule without plastic sleeve) | |
| 0.25 mm² ... 2.5 mm² (Ferrule with plastic sleeve) | |
| Conductor cross-section flexible (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² | 
| 0.25 mm² ... 0.75 mm² (Ferrule without plastic sleeve) | |
| 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) | |
| Conductor cross-section AWG | 24 ... 12 | 
| Tightening torque | 0.5 Nm ... 0.6 Nm | 
| Pitch | 5 mm | 
| Status display present | yes | 
| Operating voltage display | Green LED | 
| Item dimensions | |
| Width | 49.92 mm | 
| Height | 41 mm | 
| Depth | 49.86 mm | 
| Color | gray (RAL 7042) | 
| Flammability rating according to UL 94 | V0 | 
| Housing insulation material | Polyamide 6.6 green | 
| Ambient conditions | |
| Degree of protection (Module) | IP20 | 
| Degree of protection (Installation location) | ≥ IP54 | 
| Ambient temperature (operation) | -40 °C ... 70 °C | 
| Ambient temperature (storage/transport) | -40 °C ... 70 °C | 
| Altitude | ≤ 2000 m | 
| CE | |
| Certificate | CE-compliant | 
| UKCA | |
| Certificate | UKCA-compliant | 
| UL, USA/Canada | |
| Identification | Class I, Div. 2, Groups A, B, C, D T4 | 
| UL, Canada | |
| Identification | Class I, Zone 2, Ex ec IIC Gc T4 X | 
| UL, USA | |
| Identification | Class I, Zone 2, AEx ec IIC T4 | 
| Shipbuilding approval | |
| Certificate | TAE0000196 | 
| Shipbuilding data | |
| Temperature | D | 
| Humidity | A | 
| Vibration | C | 
| EMC | B | 
| Enclosure | Required protection according to the Rules shall be provided upon installation on board | 
| Electromagnetic compatibility | Conformance with EMC directive | 
| Low Voltage Directive | Conformance with Low Voltage Directive | 
| Air clearances and creepage distances | |
| Standards/regulations | EN IEC 60664-1 | 
| Mounting type | Plug-on assembly | 
| Assembly note | in rows with zero spacing | 
| Mounting position | any | 
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. | 
| Item number | 2296058 | 
| Packing unit | 1 pc | 
| Minimum order quantity | 1 pc | 
| Sales key | DK2 | 
| Product key | DK21D2 | 
| GTIN | 4017918189105 | 
| Weight per piece (including packing) | 109.8 g | 
| Weight per piece (excluding packing) | 50 g | 
| Customs tariff number | 85366990 | 
| Country of origin | DE | 
| ECLASS-13.0 | 27141152 | 
| ECLASS-15.0 | 27141152 | 
| ETIM 9.0 | EC002780 | 
| UNSPSC 21.0 | 39121400 | 
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| keine | ||||
| 24 V | 1 A | |||
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| keine | ||||
| 24 V | 1 A | |||
| EU RoHS | |
| Fulfills EU RoHS substance requirements | Yes | 
| Exemption | 6(c) | 
| China RoHS | |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. | 
| EU REACH SVHC | |
| REACH candidate substance (CAS No.) | Hexahydromethylphthalic anhydride (CAS: n/a) | 
| Lead (CAS: 7439-92-1) | |
| SCIP | c6f8eaae-6895-44cc-8c16-c72ba07c5a0e |