The Axioline E Safe IP67 I/O box is the new addition to the Axioline E system.
The I/O box enables you to process safe inputs and outputs outside of the control cabinet and transfer them to the higher-level PROFIsafe controller.
To do this, the safety protocol is transmitted to the standard network via a Phoenix Contact IO-Link master and is then processed by the safety controller.
You can address the devices easily using the AXL E ADDRESSPLUG (100053), which is available as an accessory.
AXL E IOL SDI8 SDO4 2A M12 L
-
Safety module
1185380
Axioline E-safety module, 4 safe digital inputs for 2-channel assignment, 8 safe digital inputs for 1-channel assignment, 4 safe digital +/-switching outputs, IO-Link interface, IP65/IP67 degree of protection, for PROFIsafe systems
This product needs further products for operation.
Mandatory accessories
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 59.8 mm |
| Height | 214 mm |
| Depth | 30 mm |
| Note on dimensions | Specifications including fixing clips and connectors |
| Note on application | |
| Note on application | Only for industrial use |
| Housing material | Plastic POCAN B4239 GF30 YE 1018 |
| Digital: | |
| Input name | Safe digital inputs |
| Description of the input | IEC 61131-2 type 3 |
| Number of inputs | 4 (for 2-channel assignment) |
| 8 (for 1-channel assignment) | |
| Cable length | max. 200 m |
| Connection method | M12 connector, A-coded |
| Connection technology | 3-conductor |
| Input voltage range "0" signal | -30 V DC ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 30.2 V DC |
| Nominal input voltage UIN | 24 V DC |
| Nominal input current at UIN | typ. 3.7 mA (at 24 V DC) |
| max. 4.3 mA (with 30.2 V DC) | |
| Input filter time | 1.5 ms |
| 3 ms (Default) | |
| 5 ms | |
| 15 ms | |
| Protective circuit | Overload protection, short-circuit protection of sensor supply |
| IO-Link | |
| Number of ports | 1 |
| Connection method | M12 connector, A-coded |
| Connection technology | 3-conductor |
| Port type | Class A |
| Specification | V1.1.2 |
| Reverse polarity protection | yes |
| Transmission speed | 230.4 kbps (COM3) |
| Cycle Time | ≥ 4 ms |
| Process data update | ≥ 4 ms |
| Amount of process data | 64 bit (Input and output data) |
| Digital: | |
| Output name | Safe digital outputs |
| Connection method | M12 connector, A-coded |
| Connection technology | 2-conductor |
| Number of outputs | 4 (for 2-channel assignment, +/- switching) |
| 4 (for 1-channel assignment, + switching) | |
| Protective circuit | Overload protection, short-circuit protection of outputs |
| Output voltage | UA - 1.4 V |
| Output current | max. 2 A (per channel) |
| max. 2 A (per output) | |
| max. 6 A (Total current of all outputs; Please observe the notes in the user manual.) | |
| Maximum output current per channel | 2 A |
| Nominal output voltage | 24 V DC (from voltage UA) |
| Load min. | 2.4 kΩ (10 mA at 24 V DC) |
| Output voltage when switched off | < 5 V ((in the Low state)) |
| Output current when switched off | 2 mA (Leakage current in the Low state) |
| Delay time | max. 128 s (can be parameterized) |
| Permissible cable length | max. 50 m |
| Switching frequency | max. 1 Hz |
| Reverse voltage resistance to short pulses | no |
| Product type | I/O component |
| Product family | Axioline E |
| Application | Functional safety |
| Type | Stand-alone |
| Mounting position | any |
| Operating mode | Process data mode with 4 words |
| Insulation characteristics | |
| Pollution degree | 4 |
| Supply: IO-Link | |
| Designation | IO-Link port supply (L+) |
| Nominal voltage for I/O supply | 24 V DC (Provided via the IO-Link interface of the IO-Link master.) |
| Supply voltage range | 19.2 V DC ... 30.2 V DC (including all tolerances, including ripple) |
| Nominal current per device | approx. 15 mA |
| Permissible cable length | max. 20 m |
| Protective circuit | Reverse polarity protection |
| Supply: Module electronics and sensors | |
| Designation | Supply of module electronics and sensors (US) |
| Connection method | M12 connector, L-coded |
| Number of positions | 2 |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30.2 V DC (including all tolerances, including ripple) |
| Current consumption | 67 mA (without sensors) |
| Protection | max. 8 A (slow-blow) |
| Supply: Actuators | |
| Designation | Actuator supply (UA) |
| Connection method | M12 connector, L-coded |
| Number of positions | 2 |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30.2 V DC (including all tolerances, including ripple) |
| Current consumption | 52 A (without actuators) |
| Protection | max. 8 A (slow-blow) |
| Connection method | M12 connector |
| Note on the connection method | in accordance with IEC 61076-2-101, M12 connection technology |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 60 °C (Mounting position: any) |
| Degree of protection | IP65/IP67 (in accordance with DIN EN 60529:1989 + A1:1999 + A2:2013) |
| Note | Resistant to gas that may endanger functions (sulfur dioxide (SO2), hydrogen sulfide (H2S)) |
| Air pressure (operation) | 70 kPa ... 108 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (storage/transport) | 75 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Air clearances and creepage distances | |
| Air clearances and creepage distances | in accordance with IEC 60664-1 |
| Mounting type | Panel mounting |
| Mounting panel | |
| Mounting position | any |
cULus Listed
Approval ID: E238705Functional Safety
Approval ID: 01/205/5820.00/22
Your advantages
Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061, SIL 3 in accordance with IEC 61508
Minimum installation effort with control-cabinet-free mounting
Safe outputs with up to 2 A
Long service life and high system availability with the robust design
Connection of safe sensors and actuators directly at field level
Easy device addressing with address plug