8-port Ethernet switch for building installation in REG format. Four RJ45 ports both above and below the touch protection cover.
FL SWITCH 1108 REG
-
Industrial Ethernet Switch
1473643
Unmanaged Switch 1000 REG series, 8 RJ45 ports 10/100/1000 Mbps, degree of protection: IP20, Ambient temperature (operation): 5 °C ... 50 °C, Supply voltage range: 9 V DC ... 32 V DC, REG design in accordance with DIN 43880
Product details
| Dimensional drawing |
|
| Width | 108 mm |
| Height | 90 mm |
| Depth | 62 mm |
| Note on dimensions | 6 HP |
| General | Support by phone or on-site (fee is charged) |
| Note on application | |
| Note on application | Only for industrial use |
| Housing material | PC |
| Mounting type | DIN rail mounting |
| Ethernet | |
| Number of interfaces | 8 |
| Connection method | RJ45 |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission speed | 10/100/1000 Mbps |
| Transmission physics | Ethernet RJ45 |
| Transmission length | 100 m (per segment) |
| Signal LEDs | LNK/ACT |
| No. of channels | 8 (RJ45 ports) |
| Input buffer | 1.5 Mbits |
| Output buffer | 1.5 Mbits |
| Product family | Unmanaged Switch 1000 REG |
| Type | Stand-alone |
| MTTF | 1432 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
| 615.6 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| 163.3 Years (SN 29500 standard, temperature: 50°C, operating cycle: 100%) | |
| Special properties | REG design in accordance with DIN 43880 |
| Signal delay | Store and Forward mode, 10/100 Mbps, depending on the frame size |
| Switch functions | |
| Basic functions | Unmanaged switch |
| Autonegotiation | |
| Store and Forward switching mode | |
| Status and diagnostic indicators | LEDs: US1, Link, and Activity |
| Security functions | |
| Basic functions | Unmanaged switch |
| Autonegotiation | |
| Store and Forward switching mode | |
| Local diagnostics | US Supply voltage Green LED |
| LNK/ACT Link status/data transmission Green LED | |
| Maximum power dissipation for nominal condition | 4 W |
| Test voltage | 500 V DC |
| Test section | Between the Ethernet ports 1500 V AC 1 min |
| 24 V supply (US) / FE 500 V DC 1 min | |
| Transmission medium | Copper |
| Supply | |
| Supply voltage (DC) | 24 V DC |
| Supply voltage (AC) | 24 V AC (50/60 Hz) |
| Supply voltage range | 9 V DC ... 32 V DC |
| 12 V AC ... 30 V AC | |
| Max. current consumption | 0.45 A (at Us = minimum, data transmission 1 Gbps, for AC and DC) |
| Connection method | Push-in spring connection |
| Conductor cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.5 mm² ... 1.5 mm² |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | 5 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Altitude | max. 2000 m |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Air pressure (operation) | 86 hPa ... 108 kPa (1500 m above sea level) |
| Air pressure (storage/transport) | 66 hPa ... 108 kPa (3500 m above sea level) |
| Conformance with EMC directives | EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B |
| EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A | |
| EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion B | |
| EN 61000-6-2 EN 61000-4-5 (surge) Criterion B | |
| EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A | |
| EN 61000-6-2 EN 61000-4-8 (electromagnetic fields) Class A | |
| Noise immunity | EN 61000-6-3 |
| Noise emission | |
| Standards/regulations | EN 61000-6-3 |
| Functionality | |
| Basic functions | Unmanaged switch |
| Autonegotiation | |
| Store and Forward switching mode | |
| Status display | LEDs: US1, Link, and Activity |
Your advantages
REG design in accordance with DIN 43880
Auto negotiation
Autocrossing