QUICKON T-distributor, for T-shaped power branches with round cables, 2.5 to 4 mm2, wiring of the unseparated master cable with black wing nut and the T-branch with QUICKON fast connection.
Product details
Assembly note
If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. The QUICKON T-distributor is designed for permanent installation.
Product type
Power distributor
Type
T distributor
Number of positions
5
Connection profile
4+PE
Number of connections
10
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Connection technology
Connection method
IDC connection
Conductor connection
Conductor cross section flexibel
2.5 mm² ... 4 mm²
Conductor cross section solid
2.5 mm² ... 4 mm²
Connection cross section AWG
14 ... 12
Tightening torque Union nut
10 Nm
Wrench size Union nut
30 mm
Rated surge voltage (II/2)
8 kV
Rated surge voltage (III/2)
8 kV
Rated surge voltage (III/3)
8 kV
Rated current
32 A
rated voltage (II/2)
1000 V
rated voltage (III/2)
1000 V
Rated voltage (III/3)
630 V
Nominal current IN
32 A (at 40 °C ambient temperature)
Material Housing
PA
Material Contact
Cu alloy
Material Contact surface
Sn
Flammability rating according to UL 94
V2
Material wire insulation
PVC / PE
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
Class 2 to 5 / 0.25 mm
External cable diameter
9 mm ... 16 mm (Branch line)
9 mm ... 16 mm (Master cable (for diameters < 13.5 mm, additional insert seals are available))
Wire diameter including insulation
2.4 mm ... 4.3 mm
Ambient conditions
Degree of protection
IP65
Ambient temperature (operation)
-40 °C ... 80 °C
Temperature when conductor connected
10 °C ... 50 °C (specifications of the cable manufacturer must also be observed)
