EM SWD-ADAPTER
-
Adapter
2902776
SmartWire DT™ adapter for CONTACTRON hybrid motor starters, with "Enable" input for safe shutdown up to PLe/SIL 3.
This product needs further products for operation.
Mandatory accessories
Free download available.
Downloads
Product details
| Product type | Adapter |
| Application | Connection to SmartWire-DT™ |
| Operating mode | 100% operating factor |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Input name | Enable input |
| Rated actuating voltage UC | 24 V DC |
| Switching level "High" | > 19.2 V DC |
| Switching level "Low" | < 9.6 V DC |
| Switching level | dependent on the switching device |
| Rated actuating current IC | 5 mA |
| Enable input | |
| Connection method | Push-in connection |
| Stripping length | 10 mm |
| Number of connections | 1 |
| Number of positions | 4 |
| Conductor cross-section rigid | 0.14 mm² ... 1 mm² |
| Conductor cross-section flexible | 0.14 mm² ... 1 mm² |
| Conductor cross-section AWG | 26 ... 18 |
| SmartWire™-DT | |
| Connection method | Pin strip |
| Number of connections | 1 |
| Number of positions | 8 |
| Note | For SmartWire-DT device plug SWD4-8SF2-5 PXC |
| Data: SmartWire™-DT | |
| Data rate | 125 kBd / 250 kBd |
| Connection method | Pin strip, 8-pos. |
| Current consumption IAUX | 120 mA |
| Current consumption IPOW | 25 mA |
| Dimensional drawing |
|
| Width | 22.5 mm |
| Height | 165 mm |
| Depth | 114.5 mm |
| Color | green (RAL 6021) |
| Housing material | PBT |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Standards/regulations | IEC 60947-1 |
| EN 60947-1 |
| Assembly note | On CONTACTRON hybrid motor starter |
| Mounting position | any |
