QUINT4-UPS/1AC/1AC/1KVA - Uninterruptible power supply - 2320283

Input data

AC operation
Input voltage	100 V AC -10 % / +20 %
		110 V AC -10 % / +20 %
		120 V AC -10 % / +20 %
		130 V AC -10 % / +20 %
		200 V AC -20 % / +20 %
		210 V AC -20 % / +20 %
		220 V AC -20 % / +20 %
		230 V AC -20 % / +15 %
		240 V AC -20 % / +10 %
Input voltage range	90 V AC ... 264 V AC
Input voltage range AC	184 V AC ... 264 V AC
Input voltage range AC		96 V AC ... 144 V AC
Typical national grid voltage	120 V AC
Typical national grid voltage		230 V AC
Voltage type of supply voltage	AC
AC frequency range	45 Hz ... 65 Hz
Buffer period	1 h (38 AH)
Current consumption	10.4 A (100 V AC)
		10.5 A (110 V AC)
		10.5 A (120 V AC)
		9.7 A (130 V AC)
		6.4 A (200 V AC)
		6 A (210 V AC)
		5.7 A (220 V AC)
		5.5 A (230 V AC)
		5.3 A (240 V AC)
Variable connect threshold	Can be configured using UPS-CONF software
Power factor (cos phi)	0.9
Bypass fuse	T 15 A / 250 V (MDA -15-R)
Permissible backup fuse	B16 230 V AC
Permissible backup fuse		20 A (120 V AC, Listed breaker)
Digital Control (configurable)
Designation	Remote
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 35 kΩ between Remote and SGnd)
Digital Control Low-Active (configurable)
Battery-operated start 120 V AC low signal	Connection to SGnd with < 2.7 kΩ
Battery-operated start 120 V AC high signal	Open (> 200 kΩ between Bat.-Start and SGnd)

Output data

Classification according to IEC 62040-3	VFI-SS-111
Efficiency	> 92 % (120 V AC)
Efficiency		> 94 % (230 V AC)
Nominal output voltage	100 V AC
		110 V AC
		120 V AC
		130 V AC
		200 V AC
		210 V AC
		220 V AC
		230 V AC
		240 V AC
Form of output voltage	Pure sine
Nominal output current (I_N)	7.8 A (100 V AC)
		8.1 A (110 V AC)
		8.3 A (120 V AC)
		7.7 A (130 V AC)
		5 A (200 V AC)
		4.8 A (210 V AC)
		4.5 A (220 V AC)
		4.3 A (230 V AC)
		4.2 A (240 V AC)
POWER BOOST (I_Boost)	13 A (120 V AC)
POWER BOOST (I_Boost)		7 A (230 V AC)
Output power	778 VA (700 W)
		889 VA (800 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
Apparent power	1 kVA (U_N  120 V AC)
Nominal power	900 W (U_N  120 V AC)
Maximum no-load power dissipation	typ. 17 W (120 V AC)
Maximum no-load power dissipation		typ. 25 W (230 V AC)
Power loss nominal load max.	typ. 79 W (120 V AC)
Power loss nominal load max.		typ. 55 W (230 V AC)
Crest factor	2.8
Switch-over time	0 ms
Connection in parallel	yes, 2
Connection in series	no
Mains operation
Nominal output voltage	120 V AC ±2 %
Nominal output voltage		230 V AC ±2 %
Nominal output current (I_N)	8.3 A
Nominal output current (I_N)		4.3 A (230 V AC)
POWER BOOST (I_Boost)	13 A
POWER BOOST (I_Boost)		7 A
Battery operation
Nominal output voltage	120 V AC ±2 %
Nominal output voltage		230 V AC ±2 %
Nominal output current (I_N)	4.3 A (230 V AC)
Nominal output current (I_N)		8.3 A (120 V AC)
POWER BOOST (I_Boost)	7 A (230 V AC)
POWER BOOST (I_Boost)		13 A (120 V AC)
Nominal output frequency	± 60 Hz ±0.5 % (At an input frequency of 55 Hz to < 65 Hz)
Nominal output frequency		± 50 Hz ±0.5 % (At an input frequency of 45 Hz to < 55 Hz)
Signal: AC OK
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: Alarm
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: Battery mode
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: Ready
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: P>P_n
Output voltage	24 V (SELV)
Continuous load current	≤ 20 mA

Energy storage

Nominal voltage U_N	2x 24 V DC
End-of-charge voltage	58 V (temperature compensated)
Charging current	5 A
Nominal capacity range	3.4 Ah ... 190 Ah (5x 38 Ah)
Battery technology	VRLA, VRLA-WTR
Charge characteristic curve	IU₀U
Permissible backup fuse	50 A /  58 V

Connection data

Input
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	6 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	4 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	4 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	4 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	10
Stripping length	8 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Output
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	6 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	4 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	4 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	4 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	10
Stripping length	8 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Signal
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	2.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	2.5 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	12
Stripping length	8 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

Interfaces

Interface	MINI-USB type B
Features	lockable
Maximum cable length	3 m

Signaling

Types of signaling	LED
Types of signaling		Active switching output
Signal output: Transistor output, active
Signalization designation	AC OK
Status display	LED
Color	green
Signal output: Transistor output, active
Signalization designation	Alarm
Status display	LED
Color	red
Signal output: Transistor output, active
Signalization designation	Battery mode
Status display	LED
Color	yellow
Signal output: Transistor output, active
Signalization designation	Ready
Signal output: Transistor output, active
Signalization designation	P>P_n
Status display	LED
Color	green
Signal output
Signalization designation	Reference potential for the signal inputs and outputs

Electrical properties

Number of phases	1

Product properties

Product type	AC UPS
Product family	QUINT AC UPS
MTBF (IEC 61709, SN 29500)	217546 h (230 V AC, at 40 °C)
Insulation characteristics
Protection class	I
Overvoltage category	II
Pollution degree	3 (≤ 130 V AC)
	2 (> 200 V AC)
Life expectancy (electrolytic capacitors)
Time	68970 h

Dimensions

Width	290 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left	5 mm / 5 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting

Mounting type	DIN rail mounting

Material specifications

Housing material	Metal
Hood version	Sheet steel, DIN EN ISO2081 coat - Fe/Zn 18/B/TopCoat transparent blue
Side element version	Aluminum plate, DIN EN 573-3

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C (> 50 °C: 2,5 % / K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Climatic class	3K3 (EN 60721)
Max. permissible relative humidity (operation)	≤ 95 %
Shock	15g in all directions (EN 60068-2-27)
Vibration (operation)	5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)

Standards and regulations

Uninterruptible power supply systems
Standard designation	Uninterruptible power supply systems
Standards/specifications	EN 62040-1

Approvals

UL
Identification	UL/C-UL Recognized UL 1778

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Noise emission in accordance with EN 62040-2
Noise immunity	Immunity in accordance with EN 62040-2
Noise immunity		Immunity in accordance with EN 61000-6-1 (residential), EN 61000-6-2 (industrial)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2 kV
Input		± 2 kV
Output	± 2 kV
Signal	± 2 kV
Signal		± 2 kV (USB)
Comments	Criterion A (B for USB)
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Surge voltage load (surge)
Signal	1 kV (asymmetrical)
Comments	Criterion A
Input/Output	± 1 kV (symmetrical)
Input/Output		± 2 kV (asymmetrical)
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	50 Hz
Frequency		60 Hz
Test field strength	100 A/m
Comments	Criterion A
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Item number	2320283
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CMUI15
Product key	CMUI15
Catalog page	Page 331 (C-4-2019)
GTIN	4055626244563
Weight per piece (including packing)	5.630 g
Weight per piece (excluding packing)	5.151 g
Customs tariff number	85371091
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

QUINT4-UPS/1AC/1AC/1KVA - Uninterruptible power supply

2320283

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

IECEE CB Scheme

EAC

EAC

DNV

ABS

UL Recognized

IECEE CB Scheme

cUL Recognized

ABS

EAC

EAC

DNV

cUL Recognized

UL Recognized

cUL Recognized

UL Recognized

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

QUINT4-UPS/1AC/1AC/1KVA - Uninterruptible power supply 2320283

Product details

ECLASS

ETIM

UNSPSC

Compatible products

UPS-BAT/PB/24DC/4AH - Battery module 1274117

UPS-BAT/PB/24DC/7AH - Battery module 1274118

UPS-BAT/PB/24DC/12AH - Battery module 1274119

UPS-BAT/PB/24DC/20AH - Battery module 1348516

UPS-BAT/PB/24DC/40AH - Battery module 1354641

UPS-BAT/VRLA-WTR/24DC/13AH - Battery module 2320416

UPS-BAT/VRLA-WTR/24DC/26AH - Battery module 2320429

MINI-SCREW-USB-DATACABLE - Data cable 2908217

FUSE 25A/58V TAC ATO - Fuse 1021340

UWA 130 - Mounting adapter 2901664

VS-IP20/10G-IP20/10G-94F/1 - Patch cable 1418866

PLT-SEC-T3-120-FM-UT - Type 3 surge protection device 2907918

PLT-SEC-T3-230-FM-UT - Type 3 surge protection device 2907919

Your advantages

QUINT4-UPS/1AC/1AC/1KVA - Uninterruptible power supply

2320283