DEK-OE- 24DC/  5DC/100KHZ-G
   - 
  Solid-state relay terminal block
    
      2964364
      
      
    
  
      Input solid-state relay, with DC voltage output push-pull, transmission frequency: 100 kHz, with light indicator and protective circuit in input and output circuits, input: 24 V DC, output: 4 - 18 V DC/50 mA
Product details
| Note on application | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. | 
| Product type | Solid-state relay module | 
| Product family | DEK | 
| Application | 100 kHz input optocoupler | 
| Operating mode | 100% operating factor | 
| Insulation characteristics | |
| Insulation | Basic insulation | 
| Overvoltage category | II | 
| Pollution degree | 2 | 
| Data management status | |
| Date of last data management | 15.09.2025 | 
| Test voltage (Input/output) | 2.5 kV AC (Input/output) | 
| Nominal input voltage UN | 24 V DC | 
| Input voltage range in reference to UN | 0.8 ... 1.2 | 
| Input voltage range | 19.2 V DC ... 28.8 V DC | 
| Switching threshold "0" signal in reference to UN | ≤ 0.4 | 
| Switching threshold "1" signal in reference to UN | ≥ 0.8 | 
| Typical input current at UN | 8 mA | 
| Typical response time | 1 µs | 
| Typical turn-off time | 2 µs | 
| Operating voltage display | Yellow LED | 
| Protective circuit | Reverse polarity protection; Polarity protection diode | 
| Surge protection | |
| Transmission frequency | 100 kHz | 
| Contact switching type | 1 N/O contact | 
| Design of digital output | electronic | 
| Output voltage range | 4 V DC ... 18 V DC | 
| Limiting continuous current | 50 mA | 
| Quiescent current | 8.5 mA | 
| Voltage drop at max. limiting continuous current | ≤ 1.2 V DC | 
| Output circuit | 3-conductor push-pull, ground referenced | 
| Protective circuit | Surge protection; Suppressor diode | 
| Connection method | Screw connection | 
| Stripping length | 8 mm | 
| Screw thread | M3 | 
| Conductor cross-section rigid | 0.2 mm² ... 2.5 mm² | 
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² | 
| Conductor cross-section AWG | 24 ... 14 | 
| Tightening torque | 0.4 Nm ... 0.5 Nm | 
| Width | 6.2 mm | 
| Height | 80 mm | 
| Depth | 56 mm | 
| Color | green (RAL 6021) | 
| Ambient conditions | |
| Ambient temperature (operation) | -20 °C ... 60 °C | 
| Ambient temperature (storage/transport) | -20 °C ... 70 °C | 
| Standards/regulations | IEC 60947-5-1 | 
| Mounting type | DIN rail mounting | 
| Assembly note | in rows with zero spacing | 
| Mounting position | any | 
| Item number | 2964364 | 
| Packing unit | 10 pc | 
| Minimum order quantity | 1 pc | 
| Sales key | DK61A1 | 
| Product key | DK61A1 | 
| GTIN | 4017918107437 | 
| Weight per piece (including packing) | 22,7 g | 
| Weight per piece (excluding packing) | 21,6 g | 
| Customs tariff number | 85364190 | 
| Country of origin | CN | 
ECLASS
| ECLASS-13.0 | 27371604 | 
| ECLASS-15.0 | 27371604 | 
ETIM
| ETIM 9.0 | EC001504 | 
UNSPSC
| UNSPSC 21.0 | 39122300 | 
| EU RoHS | |
| Fulfills EU RoHS substance requirements | Yes | 
| Exemption | 7(a), 7(c)-I | 
| China RoHS | |
| Environment friendly use period (EFUP) | 
              EFUP-50
               An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. 
             | 
          
| EU REACH SVHC | |
| REACH candidate substance (CAS No.) | Hexahydromethylphthalic anhydride (CAS: n/a) | 
| Lead (CAS: 7439-92-1) | |
| SCIP | 502efe35-e5ee-40ab-b585-4235f45d8ad8 | 
Compatible products
            Note: Applying some accessories below might limit this product.
          
          
        - 
    
      
 - 
    
      
EB 3- DIK RD - Insertion bridge 2716745
 - 
    
      
EB 4- DIK RD - Insertion bridge 2716758
 - 
    
      
EB 5- DIK RD - Insertion bridge 2716761
 - 
    
      
EB 10- DIK RD - Insertion bridge 2716774
 - 
    
      
EB 80- DIK RD - Insertion bridge 2715953
 - 
    
      
EB 5- DIK BU - Insertion bridge 2716677
 - 
    
      
EB 10- DIK BU - Insertion bridge 2716680
 - 
    
      
EB 80- DIK BU - Insertion bridge 2715940
 - 
    
      
D-DEK 1,5 GN - Separating plate 2716949
 - 
    
      
ZB 6:UNBEDRUCKT - Zack marker strip 1051003
 - 
    
      
ZB 6/WH-100:UNBEDRUCKT - Zack marker strip 5060935
 - 
    
      
DIKD 1,5 - Initiator/actuator terminal block 2715979
 
Your advantages
With capacitor on the input side for interference suppression
        Limit frequency of up to 100 kHz
        Includes signal inputs on PLC counter boards
        Push/pull stage on output side
        PHOENIX CONTACT B.V.
        
        Hengelder 56, 6902 PA Zevenaar, Postbus 246, 6900 AE Zevenaar