SK 8
-
Shield connection terminal block
3025163
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
Product details
| General | |
| Note | The shield connection clamps must not be used for strain relief of cables/conductors. |
| Do not use for pretective conductor connection. | |
| Product type | Shield connection clamp |
| Pitch | 12 mm |
| Number of connections | 1 |
| Number of rows | 1 |
| Maximum power dissipation for nominal condition | 0 W |
| Contact resistance | < 0.001 Ω |
| Connection method | Screw connection |
| Screw thread | M4 |
| Tightening torque | 0.6 ... 0.6 Nm |
| Connection in acc. with standard | IEC / EN |
| Dimensional drawing |
|
| Width | 12 mm |
| Height | 19.5 mm |
| Depth | 48.7 mm |
| Pitch | 12 mm |
| External dimensions | |
| Outside diameter | 3 mm ... 8 mm |
| Color | silver-colored |
| Material | Steel |
| External cable diameter | 3 mm ... 8 mm |
| Connection in acc. with standard | IEC / EN |
| Mounting type | Neutral busbar |
Your advantages
Easy handling
Spring-loaded, large-surface pressure plate
Suitable for direct and busbar mounting
Knurled screw
As components, it is not possible to certify shield connections in accordance with the requirements of the directive and standards for electrical equipment in potentially explosive areas. As such, shield connection clamps can be used in the Ex area even without an appropriate approval or marking.